JVC SR-9090U instruction manual Controls and Connectors, Display

2 CONTROLS AND CONNECTORS

2-1 Front Panel

24 25 26

2 CONTROLS AND CONNECTORS

2-2 Display

1 6 7 8 9 10 11 12 13

REC	STOP	REC
		CHECK				OPERATE
						HDR
REW REVERSE PAUSE		PLAY FF
		TRACKING		V. LOCK		TIMER SEARCH DISPLAY LOCK CNT RESET
FIELD REV		–	+	–	+
		FIELD ADV

�

SR-9090U

REC

EJECT OPERATE

RESET/	ON SCREEN
CANCEL
	SHIFT
MENU	TIME MODE
	– S E T +

2 3 4 5

1Operation mode display Shows the operation modes.

5 Recording/playback speed display

• Normally shows the recording/playback speed mode set

16 17 18 19 20 21 22 23

with the [TIME MODE] button.

• Shows the following indications in the Alarm Search

^[SEARCH] button

Use to search the alarm recorded section or a section recorded at a specified date and time. In the Stop mode, select the search mode by pressing this button.

•Press once to engage the Alarm Search mode.

•Press twice to engage the Alarm Scan mode.

•Press three times to engage the Date/Time Search mode.

•Press four times to release the search mode.

After the search mode is selected with this button, press the [FF] or [REW] button to execute the search operation in the selected mode.

For details, refer to page 49.

&[DISPLAY] button

Selects which data — current time, control tape counter (00H 00M 00S — 23H 59M 59S) or reel tape counter (0 — 9999) — is displayed. Each time this button is pressed, the display switches to the next item.

*[LOCK] button

Press to activate the operation lock function.

([CNT RESET] button

When the display shows the control tape counter or reel tape counter, press this button to reset to “00H00M00S” or “0000”.

)[RESET/CANCEL] button

•In the Timer Program Setting mode, press this button to cancel the program settings. For details, refer to “Timer Recording” on page 36.

•Also press this button to interrupt alarm recording or to reset the alarm input data or power loss (power failure) data. For details, refer to pages 21 and 39.

•Resets the seconds in the currently displayed time to 00 when pressed together with the ( [CNT RESET] button (except in menu setting mode).

-When the seconds value is 29 or less, the minutes value is the same but the seconds value is reset to 0. (eg. 12:34:29 [ 12:34:00)

-When the seconds value is 30 or more, the seconds value is reset to “00” and the minutes value is increased by one. (e.g. 12:34:30 [12:35:00)

q[MENU] button

Presstodisplaythedate/time,timerprogram,andvariousother menu setting screens, as well as the hour meter, on the monitor. Press again to cancel the menu or hour meter display.

w[TIME MODE/SET +/–] buttons

•Use to select the recording and playback speed mode. Available recording/playback speed modes vary depending on the setting of menu switch <HDR> on the <VTR MODE> screen.

Each time these buttons are pressed, the recording/ playback speed mode changes as follows. The recording/ playback speed mode is shown on the display.

HDR recording: OFF	HDR recording: ON
2H: Standard	2H: Standard
6H: 3x	6H: 3x
24H: 24-hour SP timelapse	24H: 24-hour EP timelapse
48H: 48-hour SP timelapse	48H: 48-hour EP timelapse
72H: 72-hour SP timelapse	72H: 72-hour EP timelapse
120H: 120-hour SP timelapse	120H: 120-hour EP timelapse
168H: 168-hour SP timelapse	168H: 168-hour EP timelapse
240H: 240-hour SP timelapse	240H: 240-hour EP timelapse
480H: 480-hour SP timelapse	480H: 480-hour EP timelapse
960H: 960-hour SP timelapse	960H: 960-hour EP timelapse

•Also use these buttons during date/time setting, timer program setting and menu switch setting to specify setting values.

e[ON SCREEN/SHIFT 7/t] buttons

•Use these buttons on the normal screen to move the display position or recording position of on-screen information. The position can be moved down by pressing the 7 button and to the right by pressing the t button.

•Use these buttons on the menu screen to select the desired item in date/time setting, timer program setting and menu switch setting.

rDisplay section

For details, refer to page 11.

t[OPERATE] indicator

Lights when the [OPERATE] button is turned on.

y[HDR] indicator

Lights in the HDR recording and HDR playback modes. * HDR: High Density Recording

•For details on HDR recording, refer to page 28.

Playback Recording		Rewind	Fast-	Timelapse
			forward	playback
Still	Record-	Rewind	Fast-forward	Reverse
	pause	search	search	playback

* ( ) mark in the Rec/Pause mode is shown in red.

2 Cassette indication

Lights when a cassette is loaded. Blinks when a cassette is being ejected.

3[SP/EP] indication

Shows the standard (SP) mode or extended (EP) mode during recording/playback. During ordinary timelapse recording/playback, the [SP] indication is shown.

The [EP] indication is shown during recording in the HDR (High-Density Record) mode or during playback of a tape section recorded in the HDR mode.

4Tape counter/clock indication

•Shows the current time (hour: minute: second), tape control counter (00H 00M 00S — 23H 59M 59S) or tape reel counter (0 — 9999) when the operating mode is on. The display can be selected with the [DISPLAY] button. Shows the current time when the operating mode is off. When a cassette is ejected, the tape control counter and tape reel counter are reset automatically.

•When the cassette is rewound to the beginning in the Repeat Recording or Auto Rewind mode using the counter end output function, the tape control counter and tape reel counter are reset.

•The control and reel counter counts slowly in the Timelapse mode.

•In the timelapse mode, the control counter shows the time equivalent to that shown when a tape is played back in the 2H or 6H mode.

(Example: The control counter advances 1 second for about 8 minutes in the 960H ordinary timelapse mode.)

•During date/time search setting and operation, “td” is shown in place of the seconds.

•Shows the setting item during menu switch setting.

mode.

During alarm search: Shows the specified alarm number

(example: AL12)

During alarm scan: Shows the alarm scan mode (ALSC).

During date/time search: Shows the specified date and

time (example 2310).

• Shows setting details in menu switch setting.

• When an error occurs, the error indication “E-**” blinks (if

the menu switch <WARNING> on the <F. DISP> screen

is set to “ON”).

For error indications, refer to page 53.

6[TIMER] indication

Lights during timer recording programming/operation.

7[REPEAT] indication

When <REPEAT REC> in the <VTR MODE> menu is set to “ON”, this indication is shown. When <TAPE END MODE> in the <ALARM/SENSOR MODE> menu is set to “STOP” and the Repeat Record mode is engaged, the [REPEAT] indication goes out if alarm recording or sensor recording takes place.

8[OVERLAP] indication

Blinks when programs scheduled for timer recording overlap.

9Timer program number

All programmed timer recording numbers light.

During timer recording, the number of the program being recorded blinks. When the timer recording ends, this number goes out.

0[AL] (alarm) indication

Shown during alarm recording or sensor recording. Blinks when alarm recording or sensor recording ends.

![LOCK] indication

Lights when the operation lock function is activated.

@[AL REC] (alarm recording) indication

Lights when the menu switch <REC MODE> on the <ALARM/ SENSOR MODE> screen is set to “ALARM” or “ALL”.

#[SENSOR REC] (sensor recording) indication

Lights when the menu switch <REC MODE> on the <ALARM/ SENSOR MODE> screen is set to “SENSOR” or “ALL”.

10 11