JVC SR-MV45U, SR-MV55U Playback Features, Index Search, Instant Replay, Slow Motion, Skip Search

34 EN OPERATIONS ON VCR DECK
Playback Features					Variable Speed Search
					During playback, press 5 for forward variable speed search, or
					3 for reverse variable speed search.
● Turn on the unit.					● Each press of the button increases the search speed for each
● Turn on the TV and select the AV mode.					direction.
● Slide the TV/CABLE/DBS/DVD switch to DVD.					When pressing 5:
● Press VCR/DVD repeatedly so that the VCR lamp lights up on the					(SP): +5x{+11x
unit.					(EP): +11x{+31x
					When pressing 3:
					Once 3 is pressed, reverse search starts in –1x normal playback
	VCR Lamp		VCR/DVD	3 5	speed. After this process, each press of 3 changes the search
					speed between –5x and –11x in SP mode, –11x and –31x in EP
					mode.
					(SP): –1x]–5x{–11x
					(EP): –1x]–11x{–31x
					● To resume normal playback, press 4.
					Instant Replay
TBC	INPUT SELECT +/–	TBC Lamp		8 4 97	During playback, press	. The unit rewinds the picture a little
					(about 7 seconds) and resumes playback.
					● If the button is pressed repeatedly, the unit rewinds the pictures
	VCR/DVD				continuously and resumes playback.

1	2	1	Skip Search
4	5	6

7 8 9

0

2 6

4

3 5

8 9

INPUT +/–

AUDIO

ATTENTION:

In the search, still, slow-motion or frame-by-frame playback mode,

●the picture will be distorted.

●the noise bars will appear.

●there may be a loss of color.

●you cannot hear the sound.

Still Picture/Frame-By-Frame Playback

1 Press 9 to pause during playback.

2Press 9 to activate frame-by-frame playback.

● To resume normal playback, press 4.

During playback, press 1 to 6 times to skip over unwanted sections.

●Each press initiates an approximately 30-second period of fast- motion playback. Normal playback resumes automatically.

●To resume normal playback, press 4.

Index Search

Your unit automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction.

NOTE:

Before starting, make sure the unit is in the Stop mode.

Press 2 or 6 to activate Index Search. “INDEX –1” or “INDEX 1” is displayed on the TV screen and search begins in the corresponding direction.

●To access index codes 2 through 9, press 2 or 6 repeatedly until the correct index number is displayed.

Example:

To locate the beginning of B from the current position, press 2 twice.

To locate the beginning of D from the current position, press 6 once.

Current position

Slow Motion

1 Press 9 to pause during playback.

2 Press and hold 9 for 2 seconds, then release. Press 9 and release again to return to still picture.

●The speed changes for each direction by pressing 3 and 5 repeatedly.

●To resume normal playback, press 4.

Index number

●When the specified index code is located, playback begins automatically.