OPERATIONS ON VCR DECK EN 35

Next Function Memory

The Next Function Memory “tells” the unit what to do after rewinding. Before continuing, make sure the unit is in the Stop mode.

For Automatic Start Of Playback

Press 3, then press 4 within 2 seconds.

For Automatic Cassette Ejection After Tape Rewind Press 3, then press x (VCR) on the unit within 2 seconds.

Repeat Playback

Your unit can automatically play back the whole tape repeatedly. 1 Press 4 to start playback.

2 Press and hold 4 for over 5 seconds, then release.

lights up on the front display panel.

3 Press 8 at any time to stop Repeat Playback.

Pressing 4, 3, 5 or 9 also stops Repeat Playback.

NOTES:

To select the returning point (recording end or tape end), see “RETURN POINT” on page 61.

It is possible to use the Mode Lock function. ( pg. 65)

Manual Tracking

Your unit is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the INPUT SELECT buttons.

1 During playback, press INPUT SELECT +/on the unit simultaneously to activate manual tracking.

2 Press INPUT SELECT +/on the unit or INPUT +/– on the remote control to adjust the tracking manually.

To return to automatic tracking, press INPUT SELECT +/on the unit simultaneously or eject and insert the tape again.

NOTE:

When a new tape is inserted, the unit enters the automatic tracking mode automatically.

Adjusting picture condition — Digital TBC/NR

Your unit is equipped with the Digital TBC (Time Base Corrector) that removes jitter from fluctuating video signals to deliver a stable picture even with old tapes and rental cassettes.

The Digital 3-DNR (Noise Reduction) which cuts noise and enables clear picture reproduction is also linked to this function. We recommend that you use the DIGITAL TBC/NR function when...

playing back a tape recorded on a camcorder.

playing back a tape repeatedly used.

using this unit as the source player for editing.

Press TBC on the unit so that the TBC lamp lights up on the unit.

Each time you press the button, it toggles this function on and off.

NOTES:

If you play back a tape recorded under poor TV reception condition, the picture may become more stable with Digital TBC/NR deactivated.

If you play back a tape where certain types of signals are recorded (using a PC or some character generators) with Digital TBC/NR activated, the playback picture may be distorted. In this case, deactivate Digital TBC/NR.

Digital TBC/NR and Video Stabilizer ( pg. 61) cannot be used at the same time; if you activated Digital TBC/NR when “VIDEO STABILIZER” is set to “ON”, Video Stabilizer will be automatically turned “OFF”. Make sure Digital TBC/NR is deactivated when you want to use Video Stabilizer.

Soundtrack Selection

Your unit is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing AUDIO changes the soundtrack as follows:

TRACK

USE

 

On-Screen Display

 

 

 

HI-FI

Hi-Fi sound is played back

 

 

HI-FI L

Sound on the left Hi-Fi channel is

played back

 

 

 

HI-FI R

Sound on the right Hi-Fi channel is

played back

 

 

 

NORM

Sound on the normal track is played

back

 

 

 

NORM

Both sounds on the Hi-Fi track and

normal track are mixed and played

HI-FI

back

 

 

 

NOTES:

“HI-FI” should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the normal audio track is played back automatically for tapes with only normal audio.

“SUPERIMPOSE” must be set to “ON” or “AUTO” or the on-screen displays will not appear. ( pg. 61)

VHS Progressive Scan

You can watch the image on VCR deck in the Progressive scan mode via component video.

ATTENTION:

Your TV needs to be compatible with Progressive and to have Component video input connectors.

ASet the Progressive-compatible TV to the component input mode.

B Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit, then press PROGRESSIVE SCAN for 3 or more seconds

so that the Video output indicator () lights on the front display panel.

C Press VCR/DVD repeatedly so that the VCR lamp lights up on the unit.

D Press VCR]DVD.

NOTE:

Be sure to engage the DVD deck in stop mode.

Page 35
Image 35
JVC SR-MV55U, SR-MV45U manual Next Function Memory, Manual Tracking, Soundtrack Selection, VHS Progressive Scan