JVC SR-MV45U Still Picture/Frame-By-Frame Playback, Slow Motion, Skip Search, To mark positions

22 EN OPERATIONS ON DVD DECK

Still Picture/Frame-By-Frame Playback		NOTES:
		● “DISC RESUME” setting works on DVD VIDEO, VCD and already
		finalized DVD-R/DVD-RW (video mode) discs. For other types of
		discs, the function under “ON” setting will be applied even if
		“RESUME” is set to “DISC RESUME”. ( pg. 59)
1 Press 9 to pause during playback.
		● If you stop the playback of a disc for which an resume point has
2 Press 9 or w e to activate frame-by-frame playback.		already been memorized, the memory will be updated with the new
		resume point.
● Each press of 9 advances the still picture frame by frame.		● After the unit has memorized the resume point for 30 discs,
● Each press of w e advances/reverses the still picture frame by		remembering a new resume point will cause the unit to delete the
frame.		oldest memorized point. Stopping playback of a disc for which a
● Frame-by-frame playback for reverse direction cannot be performed		resume point is already stored may change the order in which the
with Video CD discs.		points are stored. This may potentially change the order in which
● To resume normal playback, press 4.		points are deleted.
Slow Motion		● When the unit memorizes a resume point for a disc, it also
		remembers audio language, subtitle and angle settings.
		● This function may not work for some Video CD.
		● When “RESUME” is changed to “ON” or “OFF” ( pg. 59), resume
		points of the discs memorized with “RESUME” set to “DISC
		RESUME” will be cleared.
1 Press 9 to pause during playback.
		● Resume points are memorized for each side of a double-sided disc.
2 Press SLOW – (3) or SLOW + (5).		Marking Positions To Play Back Again Later
● Each press of SLOW – (3) or SLOW + (5) increases the slow
motion speed for each direction (from 1/16 to 1/2 times the normal
speed).
● Slow motion for reverse direction cannot be performed with Video CD
discs.
		It is possible to mark positions (up to 999 points) where you want to
Skip Search		play back once again later, and start playback from a marked
		position.
		To mark positions:
		During playback or recording, press
		MARK at positions you want to mark.
During playback, press	.
		● “MARK” appears on the TV screen.
● Each press initiates an approximately 30-second period of fast-		You can easily locate the marked
motion playback. Normal playback resumes automatically.		positions using 2 or 6 when you
● Skip search cannot be performed when a Video CD disc is being		play back the disc.
played back with the PBC function.		To delete the marked positions:
Resume Function		While paused, press 2 or 6 to
		locate a marked position you want to
		delete, then press MARK.
		● Crossed “MARK” appears on the TV
		screen, and the marked position is
		deleted.
It is possible to memorize the position where you stop playback
		NOTE:
and resume playback from that position.
● Be sure to set “RESUME” to “ON” or “DISC RESUME”. ( pg. 59)		When a DVD-R/RW (Video mode) disc is finalized, marked points
1 Press 8 during playback to memorize a resume point.		marked before finalizing will be deleted, and programs will be divided

● The unit enters Resume Stop mode and memorize the position	automatically into “chapters” approximately every 5 minutes.
	( pg. 63)
where you have stopped playback as a resume point. (The inside of
the disc status indicator on the front display panel blinks while
memorizing.)
● The unit retains a memory of the resume points of the last 30 discs
played back, even though they have been ejected if “RESUME” is set
to “DISC RESUME”. ( pg. 59)
● Performing the following steps would erase the resume points:
(The inside of the disc status indicator stops blinking and lights.)
When “RESUME” is set to “ON”:
• Press 1 to turn off the unit.
• Press x (OPEN/CLOSE) to take out the disc.
• Press 8 in stop mode.
• Press TOP MENU to display the top menu, then start playback by
selecting an item, etc.
• Press MENU to display the disc menu, then start playback by selecting
an item, etc.

When “RESUME” is set to “DISC RESUME”:

•Set “RESUME” to “OFF”. ( pg. 59)

•Press 8 in stop mode.

•Press TOP MENU to display the top menu, then start playback by selecting an item, etc.

•Press MENU to display the disc menu, then start playback by selecting an item, etc.

2 Press 4 in stop mode to resume playback. The unit starts playback from the resume point.