SUBSIDIARY SETTINGS EN 65
Scan Mode Set
If you connect the unit and TV with Component Video Connection ( pg. 16), you can select the scan mode from two modes: Interlaced scan mode which is used in the conventional TV system, and Progressive scan mode which enables reproduction of
( pg. 69).
ATTENTION:
Your TV needs to be compatible with Progressive.
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/CABLE/DBS/DVD switch to DVD.
VCR/DVD
1 2 3
4 5 6
7 8 9
0
PROGRESSIVE SCAN
Tray Lock (DVD Deck Only)
You can lock the disc tray to prohibit the unwanted disc ejection by children.
●Turn off the unit.
x 8 |
To lock tray
While the unit is turned off, press and hold 8, then press x
(EJECT) on the unit. “LOCKED” appears on the front display panel and the disc tray is locked.
To unlock tray
While the unit is turned off, press and hold 8, then press x (EJECT) on the unit. “UNLOCK” appears on the front display panel.
NOTE:
To engage Tray Lock, “POWER SAVE” must be set to “OFF”
( pg. 59). In addition, the Tray Lock function is cancelled when the AC power plug is disconnected from the AC outlet. It is therefore advisable to use the Mode Lock function.
1 Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit.
2 Press PROGRESSIVE SCAN for 3 or more seconds.
●Video output indicator (
) lights on the front display panel if Progressive scan mode has been established. ( pg. 13)
●Each press of PROGRESSIVE SCAN for 3 or more seconds switches the scan mode.
NOTES:
●When the Progressive scan mode is engaged, no video signal is output from [AUDIO/VIDEO] and
●Interlaced scan mode is the setting at your purchase.
●Interlaced scan mode might be suitable depending on video material.
●Scan mode cannot be set while menu screen is displayed.
Watch the image on VCR deck in the Progressive scan mode via component video
ASet the
B Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit, then press PROGRESSIVE SCAN for 3 or more
seconds so that the Video output indicator (
) lights on the front display panel.
C Press VCR/DVD repeatedly so that the VCR lamp lights up on the unit.
D Press VCR]DVD.
NOTE:
Be sure to engage the DVD deck in stop mode.
Mode Lock
During playback, recording or in stop mode, press and hold F1 on the remote control for more than 5 seconds. “LOCKED” appears on the front display panel.
●No buttons will function and playback and recording will not be interrupted.
●When the unit is in the stop mode, all buttons will not function except 7 and 4.
To cancel Mode Lock, press and hold F1 again for more than 5 seconds.
NOTES:
●It is also possible to use Mode Lock during Repeat Playback ( pg. 29, 35).
●It is not possible to engage Mode Lock when the Main Menu screen, Library Database DVD Navi screen or the
●During Mode Lock, certain commands of the
●Unlike the Tray Lock function, Mode Lock will not be cancelled even if the AC power plug is disconnected from the AC outlet. When the AC power plug is reconnected, “LOCKED” appears on the front display panel and the unit remains in the power off condition.
You can turn on the unit; however, it is not possible to turn off the unit thereafter. Only 7 and 4 are functional.
Last Function Memory
Before disconnecting the AC power plug from the AC outlet, press 1 to turn off the unit, your settings for the following functions are kept in the memory. These settings will resume when the unit is turned on again.
●Input selection (auxiliary input;
●Recorder selection (The last selected deck is memorized.)
●Recording mode ( pg. 36)
●Mode settings ( pg. 58 – 61)
