JVC SR-MV45U, SR-MV55U manual Digital Audio Dubbing, En Editing, Example Dubbing to an MD

54 EN EDITING

	Digital Audio Dubbing		1 Connect the unit and a digital audio device using either an
			optional optical cable or an optional coaxial cable.
			2 Place a disc on the unit and load an MD on the connected digital
You can dub selected audio from a DVD or Audio CD disc to a
			audio device.
digital audio device.
			3 Select the audio to be dubbed.
However, it is not possible to dub copy-protected discs.
			4 Start playback slightly before the actual point from where you
● Turn on the TV and select the AV mode.			wish to start dubbing.
● Slide the TV/CABLE/DBS/DVD switch to DVD.			5 Press 9 to pause playback.
Example: Dubbing to an MD			6 Select the input mode on the connected digital audio device.
		Recorder	7 Press 4 to start playback on the unit.
			8 Start recording on the digital audio device.
			9 Stop recording on the digital audio device. Then press 8 to stop
			playback on the unit.
			NOTE:
			There may be a discrepancy of several seconds between where you
			intend editing to start, and where it actually starts.

Player

Optical cable (not supplied)

To [DIGITAL AUDIO OUT (OPTICAL)]

Digital audio device (MD deck, etc.)

Coaxial cable (not supplied)

To [DIGITAL AUDIO OUT (COAXIAL)]

Rear of unit

Note for connection:

Remove the protection cap from the cable.