|
|
|
| EDITING EN 49 | ||
|
|
|
|
|
| |
| Manual Dubbing (From DVD To VCR) |
| 1 Load a disc you want to dub on the DVD deck, and a cassette | |||
| ||||||
|
| with the record safety tab intact on the VCR deck. | ||||
|
|
|
| 2 Press VCR}DVD to select the dubbing direction. The dubbing | ||
Dubbing A Part Of A Disc | ||||||
| (DUBB.) lamp lights up on the unit. | |||||
|
|
|
| 3 Prepare the DVD deck for dubbing. | ||
You can dub the selected scenes on a DVD disc to the tape, | ||||||
starting and stopping wherever you wish. |
| A Press VCR/DVD repeatedly so that the DVD lamp lights up on | ||||
| the unit. | |||||
|
|
|
| |||
● Turn on the unit. |
| B Locate the point from where you want to start dubbing, then | ||||
| pause playback by pressing the following buttons: 4, 5, 3, | |||||
● Turn on the TV and select the AV mode. |
| |||||
● Slide the TV/CABLE/DBS/DVD switch to DVD. | 8, 9 |
| ||||
|
|
| 4 Prepare the VCR deck for dubbing. |
| REC |
| A Press VCR/DVD repeatedly so that the VCR lamp lights up on |
| VCR/DVD MODE | DUBB. VCR } DVD | the unit. |
|
|
| B Press REC MODE repeatedly to set the recording mode. |
|
|
| ( pg. 36) |
|
|
| C Press 7 and 9 simultaneously so that the VCR deck enters the |
|
|
| Record Pause mode. |
|
|
| 5 Press and hold DUBB. for more than 2 seconds to start the |
|
|
| dubbing. The dubbing (DUBB.) lamp blinks on the unit. |
DUBB. Lamp | 83 U 597 | 6 Press 8 to stop recording on the VCR deck. Then press VCR/ | |
|
|
| DVD, and press 8 to stop playback on the DVD deck. |
|
|
| ● Press VCR}DVD to turn off the dubbing (DUBB.) lamp. |
VCR/DVD
1 2 3
4 5 6
7 8 9
0
PROGRESSIVE SCAN
4
3 
5
8 
9
REC MODE 
7
NOTES:
●It is not possible to start dubbing if the unit retains a memory of the resume points. Press 8 twice to clear the resume points.
●There may be a discrepancy of several seconds between where you intend dubbing to start, and where it actually starts.
●If you do not want the superimposed indication to be recorded, set “SUPERIMPOSE” to “OFF” before dubbing. ( pg. 59)
●When the end of the tape is reached during dubbing, the tape is ejected and both deck stops.
●When the progressive mode is set, the dubbing (DUBB.) lamp does
not light up on the front display panel. Press PROGRESSIVE SCAN so that video output indicator (
) lights off on the front display panel.
●It is not possible to perform other operations like Live Memory Playback. Check the recorded program on the disc after dubbing.
