OPERATIONS ON VCR DECK EN 33
1 Load a cassette. Make sure the window side is up, the rear label
Basic Playbackside is facing you and the arrow on the front of the cassette is pointed toward the unit.
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/CABLE/DBS/DVD switch to DVD.
|
| VCR/DVD 3 5 |
x | VCR Lamp | 8 4 |
●Do not apply too much pressure when inserting.
●If the record safety tab has been removed, playback begins automatically. However, if “REC SAFETY” is set to “OFF” ( pg. 61), playback will not begin automatically.
●The unit’s power comes on automatically and the counter is reset to 0:00:00.
2 Press VCR/DVD repeatedly so that the VCR lamp lights up on the unit.
3 Find the program start point. If the tape is advanced past the start point, press 3. To go forward, press 5.
4 Press 4 to start playback.
5 Press 8 to stop playback.
●To eject the cassette, press x (VCR).
VCR/DVD
1 2 3
4 5 6
7 8 9
0
4
3 
5
8
Clean the video heads using a dry cleaning cassette
—
●Rough, poor picture appears while a tape is played back.
●The picture is unclear or no picture appears.
●“USE CLEANING CASSETTE” appears on the screen (only with “SUPERIMPOSE” set to “ON” or “AUTO”). ( pg. 61)
NOTE:
The heads get dirty in the following cases:
●in an environment prone to extreme temperature or humidity
●in a dusty environment
●flaw, dirt or mold on video tapes
●continuous usage for a long time
Usable cassettes
Full-Size VHS
T90
Compact VHS*
*Compact VHS camcorder recordings can be played on this unit. Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any
**This unit can record on regular VHS and Super VHS cassettes. While only VHS signals can be recorded on regular VHS cassettes 1), both VHS and Super VHS signals can be recorded and played back using
Super VHS cassettes.
1)By using the
