JVC XV-THA30R, TH-A30R manual Press AUX to select the external, component as the source, Logic

For Dolby Pro Logic:

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1 Press AUX to select the external	AUX
component as the source.

2Start playing a source encoded with Dolby Surround.

3 Press PRO LOGIC repeatedly on the	PRO LOGIC
remote control to select Dolby Pro
Logic.
4 Press SETTING repeatedly until one of	SETTING
delay time indications (with the current
setting*) appears on the display.

•Each time you press the button, the indication in the main display changes as follows:

R–DLY		Normal indication
		(canceled)
R–DLY(Rear delay) : To register delay time for rear
	speakers—from 15 msec to 30 msec.

*The initial setting for the rear speakers is “15 MS.”

If you have already changed the setting, a different value will be shown.

5Press 3 or 2 to adjust delay

time.

•3 : Increases delay time.

• 2 : Decreases delay time. ENTER

•1 msec increase (or decrease) in delay time corresponds to 30 cm increase (or

decrease) in distance.

Left front	Center speaker	Right front
speaker		speaker

Subwoofer

3.0 m

2.7 m

2.4 m

2.1 m

Left rear	Right rear
speaker	speaker

1 msec increase (or decrease) in delay time corresponds to 30 cm increase (or decrease) in distance.

Ex. : In this case, set C–DLY to “01 MS” and R–DLY to “03 MS”

17