To turn off the sounds temporarily
From the remote control ONLY:
Press MUTING.
To restore the sound, press | TOP MENU MENU RETURN MUTING |
MUTING again. |
|
•Pressing VOLUME + or – also restores the sound.
6 Activate DSP Mode
You can enjoy DSP modes.
DSP
DANCE CLUB
DSP modes take effect only when you enjoy a disc recorded using Linear
Sound signal indicators on the display
To activate DSP modes
Press DSP MODE (or DSP on the front panel). | DSP MODE |
|
The DSP indicator lights up and the current DSP mode appears on the display for a while.
•Each time you press the button, DSP mode changes as follows:
THEATER 
HALL 
LIVE CLUB
Normal
indication 
DANCE CLUB 
(canceled)
–For
Note:
Before activating the DSP mode, adjust the speaker setting to bring out the best performance from this system.
For
7 Stop Playback
Press 7 twice.
TUNER PRESET
Playback stops completely and “VCD” or “CD” appears on the display. (The DVD player goes on working for 3 minutes after playback stops.)
•This system can memorize the end point even
when you press 7 once. When you start playback again by pressing 3/8, playback begins from where it has been stopped— Resume play.
To remove the loaded disc
Press 0.
“OPEN” appears on the display and the disc tray comes out.
To close the disc tray, press 0 again.
•If you do not press the button, the disc tray closes automatically after 3 minutes.
To turn off the power (into standby)
Press STANDBY/ON | AUDIO (or | STANDBY/ON | ||
STANDBY/ON | on the front panel). | |||
AUDIO | ||||
|
|
| ||
The illumination lamp goes off and the STANDBY lamp lights up.
•If you press STANDBY/ON 
AUDIO (or
STANDBY/ON 
on the front panel) while the disc tray is kept open, the disc tray closes automatically, then the system is turned off.
•A small amount of power is consumed even in standby mode. To turn the power off completely, unplug the AC power cord.
13
