Using Preset Tuning
Once a station is assigned to a channel number, the station can be quickly tuned. You can preset up to 15 FM and 15 AM stations.
To store the preset stations
From the remote control ONLY:
1Tune in the station you want to preset (see “Tuning in Stations”).
2 Press PROGRAM. | PROGRAM |
|
The preset number appears on the display and the
PROGRAM indicator lights up.
Preset number
3Press TUNER PRESET UP or DOWN to select a
preset number.
DOWN | UP |
REW | FF |
4 Press PROGRAM to store the preset | PROGRAM |
station. |
|
The PROGRAM indicator goes off, and the station is assigned to the selected preset number.
5Repeat steps 1 to 4 until you store all the stations you want.
To erase a stored preset station
Storing a new station on a used number erases the previously stored one.
To tune in a preset station
From the remote control:
1 Press FM/AM repeatedly to select the | FM/AM |
| |
band. |
|
The last received station of the selected band is tuned in.
•Each time you press the button, the band alternates between FM and AM.
2Press TUNER PRESET UP or DOWN until the
desired preset station | TUNER PRESET |
|
appears on the | DOWN | UP |
|
| |
display. | REW | FF |
• TUNER PRESET UP | : Increases the preset number. |
|
•TUNER PRESET DOWN : Decreases the preset number.
On the front panel:
1 Press SOURCE repeatedly until the | SOURCE |
| |
desired band appears on the display. |
|
2 Press 7 so that “PRESET” appears on the display.
•Each time you press the button, the operation mode of ¢ and 4 buttons alternates between “PRESET” and “MANUAL.”
PRESET : Select this for using ¢ and 4 as the buttons to select the preset station.
MANUAL : Select this for using ¢ and 4 as the buttons to change the frequency manually.
3 Press ¢ or 4 repeatedly until the desired preset station appears on the display.
•¢ : Increases the preset number.
•4 : Decreases the preset number.
Selecting the FM Reception Mode
When an stereo FM program tuned currently is noisy, you can change the FM reception mode to improve the reception.
Press AUDIO/FM MODE. | AUDIO/ | |
FM MODE | ||
The | indicator goes off from the display and the |
|
program loses the stereo effect. |
| |
To resume the stereo effect, press AUDIO/FM MODE again. The stereo effect resumes.
Note:
The FM reception mode will also resume in the following case:
•When you change the frequency, the preset number, or the band
45
