5To adjust the output level for the center speaker, the rear speakers, and the subwoofer.
1) Press SOUND repeatedly to select the SOUND
“CEN,” “REAR,” or “SW.”
•Each time you press the button, the indication on the display changes as follows:
00 F 00 
00 R 00 
CEN
|
| Normal indication |
| SW |
| REAR |
|
| |
|
| (canceled) |
|
|
|
| |||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
CEN (Center) | : To adjust the output level for center | ||||||||
|
|
| speaker (from | ||||||
|
|
|
|
|
|
|
| ||
REAR | : To adjust the output level for rear | ||||||||
|
|
| speakers (from | ||||||
|
|
|
|
|
|
|
|
|
|
SW (Subwoofer) : To adjust the output level for subwoofer (from
•When selecting “3 STEREO,” you cannot adjust the output levels for the rear speakers.
•“CEN 0dB,” “REAR 0dB,” and “SW 0dB” are the initial settings. If you have already changed the settings, another value will appear.
2) Press 3 or 2 to adjust the output level.
3: Increases the output level.
2 : Decreases the output level. | ENTER |
3) Repeat 1) and 2) for setting the other speakers.
Adjusting DSP Modes
You can adjust the following settings while activating DSP modes. It is recommended that you make adjustments from your actual listening point while listening to reproduced sounds.
–Output balance for the front speakers
–Output balance for the rear speakers
–Output level for the rear speakers
–Output level for the subwoofer
•DSP modes cannot be used with Dolby Surround. Once one of DSP modes is activated, Dolby Surround in use will be canceled.
•When you play back a DVD encoded with Dolby Digital or DTS Digital Surround, DSP MODE button (or DSP button on the center unit) does not work.
Before you start, remember...
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.
1Select and play any source except Dolby Digital or DTS Digital Surround.
2 Press DSP MODE (or DSP on the front | DSP MODE |
| |
panel) repeatedly to select the desired |
|
DSP mode. |
|
The DSP indicator lights up on the display while the DSP modes are activated.
•Each time you press the button, DSP mode changes as follows:
THEATER 
HALL 
LIVE CLUB
Normal
indication 
DANCE CLUB 
(canceled)
Now, you are ready to start the adjustment.
•To adjust the output balance for the front speakers and the rear speakers, go to the next step.
•To adjust the output level for the rear speakers and the subwoofer, go to step 4 on the next page.
TO BE CONTINUED ON THE NEXT PAGE
23
