JVC TH-A30R, XV-THA30R Speaker Settings, Setting the Delay Time, setting* appears on the display

Speaker Settings

STANDBY/ON

AUDIO

TV	VCR	TV/VIDEO	RDS
			DISPLAY
DISPLAY	STEP	TV CHANNEL
AUDIO/	SUBTITLE	TV VOLUME
FM MODE
DVD	FM/AM	AUX	VCR
			CONTROL
	TUNER PRESET
DOWN			UP
REW			FF
	VCR CHANNEL
	TUNING

B.SEARCH F.SEARCH

Setting the Delay Time

Adjust the delay time of the sounds from the center speaker and the rear speakers, comparing to that of the sounds from the front speakers. If the distance to the center speaker* and/or the rear speakers** from your listening point is almost the same as from the front speakers, select “00 MS (msec).”

*You can adjust the delay time only when the DOLBY DIGITAL or DTS indicator is lit on the display.

**You can adjust the delay time only when the DOLBY DIGITAL, DTS, or PRO LOGIC indicator is lit on the display.

For Dolby Digital or DTS Digital Surround:

Before you start, remember...

2 3

ENTER

VOLUME

TOP MENU MENU RETURN MUTING

			SOUND
1	2	3
PTY –	PTY SEARCH	PTY +	SETTING
4	5	6
			PRO LOGIC

7 8 9

SLOW		SETUP	TEST
	0
ANGLE	ZOOM	D.R.C	DSP MODE

SETTING

PRO LOGIC

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1Select and play a DVD encoded with Dolby Digital or DTS Digital Surround.

2 Press SETTING repeatedly until one of SETTING delay time indications (with the current

setting*) appears on the display.

REPEAT A-B REPEAT PROGRAM

CLEAR SEARCH REMAIN SLEEP

•Each time you press the button, the indication in the main display changes as follows:

C–DLY R–DLY

Normal indication

(canceled)

C–DLY(Center delay) : To register delay time for center speaker—from 0 msec to 5 msec

R–DLY(Rear delay) : To register delay time for rear speakers—from 0 msec to 15 msec

*The initial setting for the center speaker is “00 MS.” The initial setting for the rear speakers is “00 MS.”

If you have already changed the setting, a different value will be shown.

3 Press 3 or 2 to adjust delay time.

•3 : Increases delay time.

• 2 : Decreases delay time. ENTER

•1 msec increase (or decrease) in delay

time corresponds to 30 cm increase (or decrease) in distance.

4Repeat steps 2 and 3 to adjust the other delay time.

16