JVC SP-XSA75 Getting started, Connections, Connecting a TV, Through the S- video jacks, “Y/C.”

Getting started

Connections

•Do not connect the AC power cord until all other connections have been made.

•Since different components often have different terminal names, carefully read the instructions supplied with the component you are going to connect.

Connecting a TV

To view pictures and on-screen displays, connect a TV to the center unit.

•Distortion of picture may occur when connecting to a TV through a VCR, or to a TV with a built-in VCR.

•You need to set “MONITOR TYPE” on the PICTURE menu correctly according to the aspect ratio of your TV. See page 57.

7To connect a TV without using the AV (SCART) connector

Connect a TV using one of the following.

• Connecting through the S-video jacks will produce a better picture quality.

• Through the S- video jacks • Through the composite video jacks

VCR

AUDIO

IN

STB

FM 75

AM LOOP

VCR

AUDIO

IN

STB

FM 75

AM LOOP

R

L

R

L

DIGITAL IN

R

L

R

L

DIGITAL IN

(STB)

VCR IN

STB IN

OUT

(STB)

VCR IN

STB IN

OUT

COAXIAL

AM EXT

COAXIAL

AM EXT

VIDEO

AV

ANTENNA

VIDEO

AV

ANTENNA

RGB

Y/C

AV COMPU

Y/C

AV COMPU

S-VIDEO

S-VIDEO

LINK-

LINK-

Match the ∞ mark on the plug to the one on the center unit.

S-video cord (not supplied)

Composite video cord (supplied)

TV To S-video input TV To composite video input

7To connect a TV through the AV (SCART) connectors

				VCR	AUDIO	IN	STB		FM 75	AM LOOP
			R	L			R	L	DIGITAL IN
									(STB)
	VCR IN	STB IN	OUT						COAXIAL	AM EXT
				VIDEO					AV	ANTENNA
				RGB	Y/C
OMPU	S-VIDEO

SCART cable (not supplied)

TV

To SCART connector*

		Set the RGB-Y/C selector correctly according to your TV.
		– If the TV accommodates the RGB video signal, set the RGB-Y/C selector to
RGB	Y/C	“RGB” so that you can enjoy better-quality pictures. The RGB lamp on the
		center unit lights up.

	– If the TV accommodates the S-video signal, set the RGB-Y/C selector to
	“Y/C.”
	NOTES:
•	When the RGB-Y/C selector is set to “RGB,” correct video signal does not come out from the S-VIDEO OUT jack on the rear panel.
•	Whether the RGB-Y/C selector is set to “RGB” or “Y/C,” the composite video signal always comes out from the VIDEO OUT jack.

*Some SCART connectors don’t output audio signal. Use a SCART connector outputting audio signal when you enjoy the TV sound through

this system. 7