Playback

NOTE

• You can also start playback by pressing

3(play button) or

DVD .

Regardless of the operation for starting playback, the system plays back all available discs sequentially until you stop playback. However, the system stops playback after playback of the disc in the

fifth tray.

 

• When Video CDs/SVCDs with PBC function (

A pg. 4) or DVD that

automatically go to the menu screen and wait for the next instruction, the system does not move to the next disc. In such a case, select the

item to be played back from the menu. (

A pg. 35)

• You can check playback information on the display window and the

 

TV screen. (

A pg. 33)

 

Some tracks on an MP3 disc may be skipped or may not be played back normally.

When you play back a JPEG disc, press buttons after the whole picture appears on the TV screen. The system cannot accept operations even though you press buttons while showing a picture.

Some files on a JPEG disc may be played back distortedly.

If a black screen continuously appears in the slide-show playback, the file currently being played may be a non-baseline JPEG file. In this case, select a playable file (a baseline JPEG file). For example, press

7or MENU to open the JPEG control display, etc. Note that it may take a long time to select another file.

7Resume Playback (DVD/Video CD/SVCD only)

When Resume Playback is set to “ON” (

 

A pg. 51) and you stop

playback by the following operations, the position where playback

has been stopped is stored. (The RESUME indicator lights.)

Turning off the power (

 

A pg. 19)

 

Pressing

7

 

 

 

Changing the source (

A pg. 20)

 

To start playback from the stored position

(The RESUME indicator goes off.)

 

 

Press the selected

DISC

button or

3 (play button) on the remote

 

control or the center unit.

 

 

 

• Select DVD as the source again if you changed the source.

To clear the stored position

Press 7 again or open the disc tray with the playback disc.

When the stored position has been cleared, playback starts from the beginning of the disc.

7To prevent screen burn-out with the screen saver

A TV screen may burn out if a static picture is displayed for a long time. To prevent this, the system automatically dims the screen if a static picture is displayed for over 5 minutes (the screen saver function).

Pressing any button will cancel the screen saver function.

If you do not want to use the screen saver function, see page 49.

7On-screen guide icons

During DVD playback, the following guide icons may appear for a while on the TV screen;

: appears at the beginning of a scene containing multi- subtitle languages.

: appears at the beginning of a scene containing multi-audio languages.

: appears at the beginning of a scene containing multi-angle views.

(Play),

 

(Pause),

/

(Fast forward/

 

fast-reverse),

 

 

 

/

 

(Slow-motion forward/

 

 

 

 

 

 

reverse): appears when you perform each operation.

 

If “B” appears on the TV screen when pressing a button, the disc cannot accept an operation you have tried to do or information required for that operation is not recorded to the disc.

NOTE

In some cases, without showing “

B”, operations will not be accepted.

If you do not want the on-screen guide icons to appear, see page 51.

7Playback information on the display window

DVD

Example: When a DVD encoded with Dolby Digital 5.1ch is played

Disc indicators

Elapsed playing time

 

 

 

Chapter number

(hour:minute:second)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Signal and speaker indicators

Surround mode and digital signal format

 

 

Each time

FL DISPLAY

is pressed, the indications

 

 

alternate between those shown above and below.

 

 

 

Title number

Chapter number

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Video CD/SVCD/Audio CD

Example: When a Video CD is played back

Disc indicators

Signal and speaker

 

Track number

indicators

 

 

 

 

 

 

 

 

Elapsed playing time (minute:second)

NOTE

• When a Video CD or SVCD with PBC function is played, the elapsed playing time does not appear, but “PBC” appears.

MP3 disc

Disc indicators

 

Signal and speaker

 

Track

number

indicators

 

 

 

 

 

 

 

 

MP3 indicator

Elapsed playing time (minute:second)

 

(during playback only)

Each time

FL DISPLAY

is pressed, the indications

alternate between those shown above and below.

 

Group number

Track number

 

 

 

 

 

 

JPEG disc

Disc indicators

File number

 

 

 

 

 

 

 

 

 

 

 

 

Group number

Continued on next page

24

Page 27
Image 27
JVC TH-M45 manual Resume Playback DVD/Video CD/SVCD only, On-screen guide icons, Playback information on the display window