
Advanced operations
Changing the VFP setting | 4 Press Cursor | //5 repeatedly to select | ||||||||
|
|
|
|
|
|
|
|
| a parameter you want to adjust. | |
The VFP (Video Fine Processor) function |
|
|
|
|
|
| ||||
|
|
|
|
|
| |||||
|
|
|
|
|
| |||||
enables you to adjust the picture character |
|
|
|
|
|
| Adjust gradually and confirm picture appearance results are as | |||
|
|
|
|
|
| |||||
according to the type of programming, |
|
|
|
|
|
| preferred. |
| ||
|
|
|
|
|
|
| ||||
picture tone or personal preference. | • GAMMA |
| ||||||||
NOTE |
| Controls brightness of neutral tints while maintaining | ||||||||
brightness of dark and bright portions. | ||||||||||
Before you start operation; | • BRIGHTNESS | |||||||||
• The VFP setting screen disappears if no operations are done for more | Controls screen brightness. |
| ||||||||
than about 10 seconds. If the setting screen disappears before you | • CONTRAST |
| ||||||||
finish, start from step 1 again. | Controls screen contrast. |
| ||||||||
|
|
|
|
|
|
|
|
|
| |
7 To select a VFP mode | • SATURATION | |||||||||
Controls screen color depth. |
| |||||||||
1 Press VFP during playback. |
| |||||||||
• TINT |
| |||||||||
Controls screen tint. |
| |||||||||
The current VFP settings appear on the TV screen. |
| |||||||||
• SHARPNESS (+0 to +3): |
| |||||||||
Example: When “NORMAL” is selected. |
| |||||||||
Controls screen sharpness. |
| |||||||||
|
|
|
|
|
|
|
|
| • Y DELAY |
|
|
|
|
|
|
|
|
|
| Controls screen color gap. |
|
5 Press ENTER.
2Press Cursor 3/2 repeatedly to select
the VFP mode.
Each time you press the button, the VFP mode changes as follows;
O NORMAL O CINEMA O USER 1 O USER 2 O (back to the beginning)
•NORMAL: Normally select this.
•CINEMA: Suitable for movies.
•USER 1 and USER 2:
You can adjust parameters that affect picture appearance and store settings. Go to step 3.
NOTE
• You cannot adjust the parameters of “NORMAL” and “CINEMA”.
Press | VFP | to return to normal screen. |
7To adjust picture appearance manually
VFP menu disappears and the following
6 Press Cursor | //5repeatedly to change |
the setting. |
|
7 Press ENTER. |
|
The current VFP settings appear again.
8Repeat steps 4 to 7 to adjust other parameters.
To return to the normal screen |
| |
Press | VFP . |
|
To activate your setting |
| |
Press | VFP , then press Cursor | 3/2 repeatedly to select “USER 1” |
or “USER 2” that you have changed the parameters.
3Press Cursor 3/2 repeatedly to select “USER 1” or “USER 2”.
42