Adjusting Image
Adjusting Images (continued)
TK-C215V12 (continued)
Registering alarm position
For registering the angle of view during monitoring when there is an alarm input.
4.
2.,3.
1.,5.
|
|
| H |
|
|
| IRIS |
| LEVEL | WHT.BAL. | |
ZOOM/FOCUS | FAR | TELE | L | [MEMORY] | |
POSITION | SELECT | WIDE | NEAR | ALARM | POSITION |
R | B |
| 8 |
| 7 |
| 6 |
| 5 |
4
4
3
2
2 1
PHASE | RESET/[SPOT] |
LL |
|
1.Check that the [ALARM POSITION] indicator light is turned on.
Registration of alarm position is enabled.
●Press the [POSITION SELECT] button if the [ALARM POSITION] indicator light is off.
2.Adjust the image size. (A pg. 25)
3.Press the [MEMORY] button for 2 seconds or longer.
The [ALARM POSITION] indicator light blinks for 3 times (green)
ALARM position registration is completed
4.Adjust the brightness. (A pg. 25)
5.Press the [POSITION SELECT] button. The camera returns to the home position
NOTE:
●Be sure to return the camera to the home position after registration of the alarm position is completed.
In addition to pressing the [POSITION SELECT] button, you can also use the power ON/OFF button to return the camera to the home position.
●To check images at the registered home position or alarm position, press the [POSITION SELECT] button. Press this button to switch between the image at the home and alarm positions.
26
