Other installation and adjustment
Mounting the Inner Dome
After setting is complete, mount the Inner dome.
Claws (3 locations)
Inner Dome
1.Mount the inner dome .
Mount the inner dome to the claws (3 locations).
CAUTION:
●Mount the inner dome such that it does not cover the lens.
●When mounting the inner dome, be careful not to move the lens position. The image angle set previously will go out of alignment.
Mounting the Dome Cover
After setting is complete, mount the dome cover.
Position mark
1.
1.Mount the dome cover.
Align the position marks on the camera unit and dome cover, followed by pressing in directly to mount the cover.
CAUTION:
Press the dome over until a “click” sound is heard. Check that the cover is firmly mounted. Failure to mount the cover firmly may cause this cover to fall off.
27
