JVC TK-C676 manual Camera Function Screen

Setting Up the Camera Using an RM-P2580

CAMERA FUNCTION Screen

This screen sets up the functions of the camera itself.

Item					Function & Setting	Initial Value
V. PHASE	This adjusts the vertical synchronization to those of other cameras when a selector					0
	switch for the synchronizing system on the Ceilling Mount is at LL. (50 Hz power
	region only.)
	When it is not set to LL, “---” will appear, disabling change the set value.
	Setting values : –156 to 0 to 156
POS.TITLE LOC.	Sets the location of the position title and area title in the monitor.					UP-L
	UP			: At the top of the screen.
	DOWN			: At the bottom of the screen.
	L			: In the left half of the screen.
	C			: In the center of the screen.
	R			: In the right half of the screen
	Setting values : UP-L, UP-C, UP-R, DOWN-L, DOWN-C, DOWN-R
FLIP	When a tilting operation is started while this item is OFF, the camera will stop at the					DIGITAL
	position where it is pointing straight downwards. When an object moves directly
	below the camera, the camera makes three movements 1points the straight down-
	ward 2 pans 180° 3 points upwards.
	The FLIP function makes it possible to reduce these operations. Use this function
	when monitoring an object passing directly below the camera.
	OFF			: Turns the FLIP function off.
	DIGITAL : Once the camera reaches a tilt of 135 degrees from horizontal after
				passing a position facing directly downwards, a picture is inverted both
	AUTO			vertically and horizontally.
				: When the camera reaches a position facing directly downwards, it pans
				by 180° then stops.
VAR. P/T SPEED	Under this function, the panning and tilting speeds are adjusted automatically rela-					ON
	tive to the zoom ratio of the lens. Setting the zoom lens towards TELE decreases
	the pan and tilting speeds.
	Setting the zoom lens towards WIDE end increases the pan and tilting speeds.
	Use this function when monitoring objects at differing zoom ratios.
	OFF : Turns this function off.
	ON : Turns this function on.
EASY AF	When this item is set to ON, the auto focusing (AF) is activated automatically dur-					OFF
	ing manual pan/tilt and zoom operations.
	This function is convenient when frequent manual operations are expected as it
	eliminates the need to focus manually after every manual operation.
	OFF : Turns this function off.
	ON : Turns this function on.
			MEMO
		Auto focusing may sometimes be incapable of bringing certain objects into accurate focus.
		(☞ P. 4)
		In this case, use the manual focusing facility.
D. ZOOM MAX	When the zoom lens is set toward TELE, optical zooming is activated first and					x2
	electronic zooming second. This function sets the maximum zoom ratio of the
	electronic zooming.
	Setting values : x1, x2, x4, x6, x8, x10.
			MEMO
		● Note Picture quality deteriorates under electronic zooming as it is accompanied by digital
			image processing.
		● An increase in the electronic zooming ratio may deviate the center of the image slightly
			toward the top left. This is due to the camera properties and is not a malfunction.
		● Continuous operation from optical zooming to electronic zooming is not available. When
			optical zooming reaches the TELE end, press the TELE button again.
PRIVATE MASK..	This function grays out sections that are not to be displayed in the monitored pic-					–
	ture area.
	The grayed out section moves accordingly when the camera is panned, tilted or
	when the zoom is adjusted.
	☞ P.29, “PRIVATE MASK Setup”

E-20