Ricoh R 3 manual Error Messages, Error Message Cause and Action

J. Error Messages

If an error message is displayed on the LCD Monitor, take the corresponding action.

Error Message	Cause and Action	Page
INSERT CARD	No card is loaded. Insert a card.	P.20
SET THE DATE ON THE SETUP	The date is not set. Set the date.	P.122
MENU
FILE NUMBER OVER	The file number limit has been exceeded. Please use	P.120
	another card, or delete unwanted files.
UNMATCHED FILE	The camera cannot display this file. Check the file contents	-
	on your computer, and then delete the file.
INSUFFICIENT MEMORY.	Because there is not sufficient capacity on the card, all the	P.18
CONTINUE?	files cannot be copied. Use another card.
PROTECTED	You are trying to delete a protected file.	P.101
THE CARD IS WRITE-	The card is "Locked (write-protection)". Unlock the card.	P.18
PROTECTED.
PRINT SETTINGS CANNOT BE	This file (movies and other) cannot be selected for printing.	-
SET FOR THIS FILE
INSUFFICIENT MEMORY	Files cannot be stored. Make sure there is enough free	P.50,
	space, or delete files.	P.112,
		P.113
	The image print number limit has been exceeded. Select an	-
	image and set the number to 0.
FORMAT INTERNAL MEMORY	It is necessary to format internal memory.	P.113
FORMAT CARD	The card is not formatted.Format the card.	P.112
CARD ERROR	Please reformat. If, after doing so, the error message still	P.112
	appears, the card may be faulty. Do not use the card.
WRITE TO CARD	Writing file to memory. Wait until writing finishes.	-
NO FILE	There are no files that can be played back.	-
CANNOT RECORD	The Number of remaining shots is 0. Switch to another card	-
	or internal memory.

177