Ricoh R 3 manual Switch the Mode Selector to Press the M/O button

Note

•When shooting with S Multi- or M Multi-Shot, the ISO sensitivity is fixed to AUTO even if it is set to 64,100.

•The maximum number of images that can be shot in the Multi-Shot mode depends on the image size setting as follows:

•The numbers of images that can be shot in the Multi-Shot mode with the built-in memory are as shown in the table below.

	F2592	N2592	3:2	F2048	N2048	F1280	N1280	N640
Digital Zoom: Off	7	7	7	6	6	13	13	13
Digital Zoom: On	6	6	6	6	6	13	13	13

•When shooting images consecutively using an SD memory card, the shot images can be recorded normally until the SD memory card becomes full. Once the number of consecutively shot images exceeds the value shown in the table above, however, the image recording speed becomes slow. (This depends on the image size setting.)

1. Switch the Mode Selector to 5.

2. Press the M/O button.

The Shooting Setting menu appears.

3. Press the " button to select [CONT] and press the $ button.

4. Press the !" buttons to select [CONT], [SCONT], or [MCONT].

5. Press the M/O or # button.

6. If you pressed the # button in step 5, press also the M/O button.

The Shooting Setting menu closes and the symbol is displayed at the top of the screen.

90