Ricoh R 3 manual Disconnecting the Camera from Your Computer

3. Select [RICOH Gate La], check [Always use this program for this action] check box, and then click [OK].

To load images from the camera with assistance from the Windows XP Scanner and Camera Wizard, select [Scanner and Camera Wizard]. Leaving the [Always use this program for this action] check box unchecked will cause the [Caplio R3] screen to be displayed each time you transfer images from the camera, thereby allowing you to choose whether to use RICOH Gate La or the Scanner and Camera Wizard for image transfers.

If your PC is installed with Windows XP Service Pack2 and a warning message is displayed, see P.165.

Disconnecting the Camera from Your Computer:

1. Turn your camera off by pressing the power button.

2. Unplug the USB cable.

Note

•If the computer does not recognize the camera, uninstall the software (P.151) and install it again.

•When downloading images from the camera, use of the AC adapter (sold separately) is recommended.

Reference

•For how to turn the camera on/off, see P.22.

•For details about [USB CONNECTION](MASS STR/Original), see P.127.

Installing Software

145