Ricoh R 3 manual 116

For detailed operation, see P.111.

2. Press the " button to select [AUTO POWER OFF] and press the $ button.

3. Press the !" buttons to select the desired setting.

4. Press the M/O or # button.

5. If you pressed the # button in step 4, press the M/O button.

This setting will be used until you change it.

Note

• To continue on using the camera after auto power-off, press the Power button to turn the camera on again. Keep pressing the Playback button for more than one second also turns on the camera, allowing you to use the camera in Playback Mode.

• The Auto Power-off function does not work when the camera is connected to a computer.

• When shooting with Interval Shooting, settings made here are not valid and Auto Power-Off does not work.

Display the setup menu.

1.

Changing Auto Power-Off Settings

(AUTO POWER OFF)

If you do not operate the camera for the set period of time, it will shut off automatically (Auto Power-off) to conserve battery power.

At the time of purchase, Auto Power-Off is set to one minute, but you can change this setting.

Possible Settings

OFF (The Auto Power-Off function does not work)

1 Minute *Setting upon purchase

5 Minutes

30 Minutes

To change the Auto Power-Off setting, follow the steps below.

116