TUsing the Self-Timer

You can set the Self-timer to shoot after either two or ten seconds. A setting of two seconds is useful for preventing camera shake.

1. Switch the Mode Selector to 5.

2. Press the T (Self-timer) button.

The LCD monitor displays the symbol. The "10" to the right of the symbol indicates the number of seconds. In this case, if you press the shutter button, the camera will shoot after 10 seconds.

3. Press the shutter release button.

The focus is locked, the flash goes on, and the self-timer starts. Once the picture is taken, the self-timer mode is cleared.

Note

Each press of the T(Self-timer) button, it selects a function in the following sequence: 10 sec, 2 sec, Self-timer Off, 10 sec, 2 sec.

Self-timer settings are released when the power is turned off.

When the self-timer is set to 2 seconds, the flash indicator for self-timer does not fire.

88

Page 90
Image 90
Ricoh R 3 manual TUsing the Self-Timer, Switch the Mode Selector to Press the T Self-timer button