Ricoh R 3 manual Changing Image Confirmation Time LCD Confirm

Changing Image Confirmation Time (LCD CONFIRM.)

Immediately after pressing the shutter button, the still image taken is displayed for a moment so you can check it.

At purchase, Confirmation Time is set to one second, but this can be changed.

Possible Settings

OFF (Photo not displayed for confirmation)

0.5Second *Setting upon purchase 1 Second

2 Seconds

3 Seconds

To change Confirmation Time, follow the steps below.

1. Display the setup menu.

For detailed operation, see P.111.

2. Press the " button to select [LCD CONFIRM.] and press the $ button.

3. Press the !" buttons to select the desired setting.

4. Press the M/O or # button.

5. If you pressed the # button in step 4, press also the M/O button.

This setting will be used until you change it.

Caution

When [LCD CONFIRM.] is set to 0.5 seconds, symbols such as the zoom bar may appear and persist on the monitor.

Changing Camera Settings

119