Ricoh R 3 manual Displaying a Setting Change Warning, Shtg Stgs Warng

Displaying a Setting Change Warning

(SHTG STGS WARNG.)

You can set the icon of a changed function to blink or a warning message indicating a change will be displayed at power-on for about 5 seconds if the initial settings are changed for the following functions.

•White Balance

•Focus

•ISO Setting

•Exposure Comp.

•Time Exposure

If you operate a camera button while an icon is blinking, the icon stops blinking and lights steadily.

If you operate a camera button during a warning message display, the message disappears.

Possible Settings

ON

OFF *Setting upon purchase

To set whether to enable (ON) or disable (OFF) the shooting setting alert, follow the steps below.

1. Display the setup menu.

For detailed operation, see P.111.

2. Press the " button to select [SHTG STGS WARNG.] and press the $ button.

3. Press the !" buttons to select

4.

5.

the desired setting.

Press the M/O or # button.

If you pressed the # button in step 4, press also the M/O button.

This setting will be used until you change it.

126