Common Operations | Continued |
|
English
Turning On or Off the Unit
To turn on the unit
Press | STANDBY/ON on the |
| STANDBY/ON |
unit or remote control. | STANDBY | or | |
The unit turns on with the last | /ON |
| |
|
| ||
source selection remaining valid. |
|
| |
To turn off the unit (on stanby)
Press 
STANDBY/ON on the unit or remote control. “BYE BYE” scrolls through briefly and the clock time appears if the clock is already set.
Setting the Clock
Before operating the unit any further, first set the
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
1 While the unit is on, press and | PROGRAM |
hold PROGRAM until “24” or |
|
“12” HOUR starts blinking. |
|
• When the unit is in standby mode, press PROGRAM once.
On clock resetting
If a power failure occurred or the AC power cord is disconnected, the clock is reset to “0:00” (flashing). In such a case you need to set the clock again.
Adjusting the Volume
• You can adjust the volume only while the unit is turned on.
Press VOLUME + or VOLUME – to |
|
increase or decrease the volume level. | VOLUME |
The volume can be adjusted in 33 steps between “VOL MIN” (minimum) and “VOL MAX” (maximum).
To increase or decrease the volume level rapidly, press and
hold VOLUME + or VOLUME
To turn off the sound temporarily
MUTING
Press MUTING on the remote control. The source name and muting indication scroll through the display, and playback continues without sound.
To restore the sound, press MUTING again or increase or decrease the volume level.
2 Press 4 or ¢ to select 12-
or
PROGRAM.
The hour indication starts blinking.
SEARCH/TUNING
DO NOT turn off the unit (on standby) with the volume 
set to an extremely high level; otherwise, a sudden blast
of sound can damage your hearing and/or the speakers when you turn on the unit or start playing any source next time.
3 Press 4 or ¢ to set the | PROGRAM |
| |
hour then press PROGRAM. |
|
| |
| |
|
The minute indication starts blinking.
4 Press 4 or ¢ to set the minute, then press PROGRAM to store the setting.
The clock starts working.
To change the hour or minute indication rapidly in steps 3
and 4, press and hold 4 or ¢.
To check the clock time while the unit is on
Press DISPLAY. | DISPLAY |
The clock time is displayed until you press any |
|
key. |
|
•In
To correct the clock time
Carry out steps 1 to 4 above.
