JVC UX-M6VUB On Screen Display OSD for a CD/VCD, Various VCD Operations, Playing a VCD with PBC

English

On Screen Display (OSD) for a CD/VCD

If you insert a CD/VCD, your TV screen will serve as an additional display for messages (such as PLAY, STOP, etc.) and information stored on the VCD/CD.

Press OSD/DIM repeatedly to select
the information to display.	OSD/DIM

The current track number and the current/remaining time of the track/disc appear on the display.

Various VCD Operations

PAUSE

During playback, press 3/8 to have a still picture on the TV screen.

The sound will be muted.

“PAUSE” appears briefly on the TV screen.

To continue playback, press 3/8 again.

GO TO

PLAY/PAUSE

Playing a VCD with PBC

When you load a VCD with PBC (Playback Control) in the disk compartment, the PBC indicator appears on the display. The PBC provides a play sequence predefined for the VCD.

1 Switch on the TV, then load a VCD with PBC.

A menu appears on the TV screen.

•If the menu consists of a list of titles, you can select the desired title directly.

This function allows you to start playback at the desired time point on the disc.

•To use the GO TO function, you need to switch off PBC beforehand.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

GOTO

1 Press GO TO on the remote control. “GO - -:- -” appears on the display.

2Press the number buttons on the remote control to enter the disc time at which to begin playback.

2Press the number buttons on the remote control to make

selection.

The VCD starts playing the selected menu item automatically.

•If the menu consists of more than one page, press 4 or ¢ to go through the pages.

1 2 3

4 5 6

7 8 9

0+10

•The disc time entered should not be greater than the total disc time.

SLOW

SLOW

Press SLOW on the remote control repeatedly to watch a VCD at a slower speed.

With each press, the playback speed changes as follows:

SLOW 1/2 SLOW 1/4

To return to the previous menu level RETURN

Press RETURN on the remote control.

PLAY SLOW 1/8

To switch off the PBC function

Press PBC on the remote control. Alternatively, press 7.

PBC

• The sound is muted.

To resume playback at normal speed, press 3/8.

“PBC OFF” appears briefly on the TV screen and the PBC indicator goes off.

•The PBC function is automatically switched off when you activate the shuffle play or VIEW function, or program tracks.

The menu structure depends on the program stored on the VCD. Refer to the information supplied with the disc.

Alternatively, press SLOW repeatedly until “PLAY” appears on the TV screen.

– 15 –