Listening to FM and AM Broadcasts | Continued | |||
|
|
| ||
|
|
|
| |
|
|
|
| |
Tuning In a Station | Presetting Stations |
| ||
|
|
|
| |
1 Press TUNER/BAND to select tuner mode. | You can preset 20 FM and 10 AM stations. |
| ||
• There is a time limit in doing the following steps. If the | ||||
The unit automatically turns on, and tunes in the last | ||||
station tuned in (either FM or AM). |
| setting is canceled before you finish, start from step 1 | ||
|
| again. |
| |
English
2 Press TUNER/BAND to select the band, FM or AM.
Each time you press the button, the band selection alternates between FM and AM.
3Press and hold 4 or ¢ until “SEARCH” appears, then release the button.
BAND
TUNER
SEARCH/TUNING
1 Tune in the station you want to preset.
• See “Tuning in a Station” on the left.
2 Press PROGRAM. | PROGRAM |
The PRESET indicator and the current preset number start blinking on the display.
The unit starts searching for stations.
When a station of sufficient signal strength is tuned in, searching stops and the TUNED indicator lights up on the display.
3If you want to change the preset number, press 8/2 or 3/8 repeatedly until the desired preset number appears.
PRESET 
DIRECTION PLAY/PAUSE
If a program is broadcast in stereo, the STEREO indicator lights up.
To stop searching, press 4 or ¢.
When you press 4 or ¢ briefly and repeatedly
The frequency changes step by step.
•Alternatively, use the number buttons on the remote control.
To select preset number 5, press 5.
To select preset number 12, press +10 and then 2.
To select preset number 20, press +10, +10 and then 0.
4 Press PROGRAM again to
store the radio station.
PROGRAM
To improve the FM reception | FM MODE |
/VOCAL |
When an FM stereo broadcast is hard to receive or noisy, press FM MODE/VOCAL to switch to the monaural reception. The STEREO indicator disappears from the display.
To restore the stereo reception, press FM MODE/VOCAL again so that the STEREO indicator lights up.
To change FM/AM tuning interval
The unit’s default tuning interval is 50 kHz/step for FM reception and 9 kHz/step for AM. You can change this setting when using the unit in an area where the frequency allocation is 100 kHz/step for FM stations and 10 kHz/step for AM stations.
1 Unplug the AC power cord.
2Press and hold 3/8 and VOLUME – on the unit simultaneously.
3Plug in the AC power cord.
4 Release the buttons.
To switch the tuning interval back to 50 kHz/step (FM)
and 9 kHz/step (AM), follow the same procedure above except in step 2 where you press and hold 8/2 and VOLUME + simultaneously.
“STORED” scrolls through briefly.
The PRESET indicator lights up steadily.
5To preset more stations, repeat the steps above, allocating a different preset number to each station.
When a new station is stored
The station previously memorized with the same preset number is erased. (The frequency of the new station replaces the previous frequency in memory.)
