JVC UX-M6VUB Playing Back CDs/VCDs/MP3-CDs, Loading a Disc, Adjusting the TV System, English

Playing Back CDs/VCDs/MP3-CDs		Continued
This unit can play back all digital audio CDs, video CDs	Loading a Disc
(VCDs), finalized digital audio CD-Recordable (CD-R) discs
	1 Press CD/SHUFFLE to select CD/		SHUFFLE
and finalized digital audio CD-Rewritable (CD-RW) discs.
	VCD mode.		CD
	The unit automatically turns on.

English

NOTES ON CD-R AND CD-RW DISCS

•When playing back a CD-R or CD-RW disc on this unit, it must be “finalized” so that it can be played back correctly.

“Finalization” is a process to create a TOC (Table Of Contents) section on a recorded disc. If you attempt to play back a non-finalized disc, especially a non-finalized CD- RW disc on this unit, malfunction may occur since no TOC section exists on the disc.

•When a non-finalized CD-R or a CD-RW disc is loaded or ejected, it may take a considerably long time to read the disc, but it is not a malfunction.

•This unit does not support track skipping function. Even if a CD-R disc or a CD-RW disc is designed to skip some tracks during playback, this unit does not skip such tracks.

•MP3-CD formats supported on this unit

–ISO 9660 format – 17 characters max.

–Number of tracks plus number of albums: 256 max.

–Number of directory nesting levels: 8 max.

–Number of albums: 99 max.

–Number of MP3 program tracks: 99 max.

–Length of each track: 255 minutes 59 seconds max.

–The player can play mixed mode disc:

a:MP3 + CD/DA can only play the MP3 tracks in the first block

b:VCD + CD/DA

–VBR bit-rate

–Sampling frequencies for MP3 disc: 32 kHz, 44.1 kHz, 48 kHz

–Bit rates of MP3 disc : 32, 64, 96, 128, 192, 256 (kbps)

•MP3-CD formats not supported on this unit

–Files like *WMA, *AAC, *DLF, *M3U, *PLS

–Chinese filenames

–Non-session closed discs

–Discs recorded in UDF format

–Multi-session discs (can only play the first session if it is in the supported format.)

Before playing back video CDs (VCDs)

The CD part of this unit also serves as a VCD player if you connect it to your TV set.

Before viewing a VCD, ensure that the TV standard, NTSC or PAL, on which your TV set is based has been selected on this unit. This is not necessary when you use a multi-system TV set.

• Switch on the connected TV when loading a VCD.

2 Press 0 OPEN/CLOSE.	OPEN
The disc tray slides out.	/CLOSE

3 Load a disc with the label side facing up.

4 Press 0 OPEN/CLOSE to close
the disc compartment.	OPEN
	/CLOSE

The total number of tracks and the playing time of the disc appear on the display. For VCD, MP3-CD and CD-RW, the disc indicator lights up.

When loading an MP3-CD format music disc

The MP3 indicator lights up and the total number of albums and total number of tracks scroll through the display, then “A01 T001” is displayed.

On the TV screen, the total number of albums (ALB), the total number of tracks (TRK), and an album list (up to 5 lines per page) with an arrow pointing at the currently selected album are displayed.

When an MP3-CD is loaded in the disc compartment, it may take more than 30 seconds to be read in, depending on the amount of information compiled in the disc. To ensure good system performance, wait until the disc is completely read in before proceeding further.

Adjusting the TV System

To view a VCD or display OSD information (see page 15) on the TV screen correctly, the NTSC/PAL setting of the unit must comply with your TV set. (This is not the case when you use a multi-system TV set.)

After loading a disc, press	NTSC/PAL
NTSC/PAL on the remote
control as required to change
the setting to “NTSC” or
“PAL”.

– 12 –