S3.45 Assembly and Maintenance Guide
4 AdjustmentsMaintenance and
After the S3.45 is completely assembled, you must check the Cables for proper tension. Obvious signs that Cable problems exist include:
✔The Cap Plate does not rest squarely on the top weight of the Weight Stack.
✔The Cable rubs the inside edges of the pulleys.
✔Excess slack exists in the Cable.
CAUTION:Take the time to perform the following steps. If the Cables do not have the proper tension, you could void the Precor Limited Warranty.
1. Cable Adjustments
A.Place the Weight Pin in the Top Cap to ensure the least Cable resistance.
B.To remove slack from the Cable, pull up on the Chest Press Handlebars and adjust the cam washer.
C.Lower the Chest Press Handlebars.
D.Check the weights. Move the Weight Pin to each weight plate and Selector Stem location.
|
| A |
|
|
|
|
| Top Cap |
|
|
|
|
| Weight |
|
|
|
|
| Top Weight |
|
|
|
|
| Weight |
|
|
|
|
| Pin |
|
| B Cam Washer |
|
|
|
|
| |
|
| C |
|
| D |
|
| Chest Press Arms |
|
|
|
|
|
|
|
| Weight |
|
|
|
|
| Pin |
1 | 2 | 3 | 4 | 5 | 6 |
Adjustments and Maintenance
page 47