S3.45 Assembly and Maintenance Guide
13. Assemble Leg Curl Seat
A.Attach the Backpad Support Tubes to the Seat Upright using
one
Note: The tube with the Selector Pivot Flat is nearest the Weight Stack. Also note that the hole in the other support tube is positioned closest to the Backpad Pop Pin, as shown. Wrench tighten, and then loosen until the support tube can fall freely without wobbling.
CAUTION: Keep your hands clear to avoid injury when the support tube falls.
B.Align the Selector Pivot Flat with the Backpad Pop Pin.
C.Attach the Seat Pad to the Seat Upright using one
one
|
| Backpad Support |
|
|
|
|
|
| Tubes |
|
|
|
|
B | Selector |
|
|
|
|
|
| Pivot Flat |
|
|
|
|
|
| Backpad |
|
|
| Seat Pad |
|
| Pop Pin |
| 1 | - 5½" bolt |
|
|
| Seat Upright |
| A 2 | - ½" washers |
|
|
|
| 1 | - ½" locknut |
|
| |
|
|
|
|
| C | 1 - 7" bolt |
|
|
|
|
| 1 - ½" locknut | |
|
|
|
| Seat Upright |
|
|
|
|
|
|
|
| A |
| 1 | 2 | 3 | 4 | 5 | 6 |
Step 13. Assemble Leg Curl Seat
page 24