<form name="myForm">

<table><tr><td>

<INPUT TYPE="BUTTON" NAME="still_btn" VALUE="Pause" onclick="still_click(this)"></td><td>

</tr></table>

</form></BODY></HTML>

8.5. Notes

-Enable the JPEG/MPEG-4 frame size that you want in Encoding page of VN-V686.

-Start Multicast stream on VN-V686 Web page to use Multicast. The ActiveX does not send request to VN-V686 for starting Multicast stream.

-Set unique Multicast address and port to each Multicast stream if multiple multicast streams are required.

9. FAQ

(1)Low Frame rate due to long delay of network

- Causes of Low Frame Rate

During transmission via TCP, VN-V686 sends out the following data by receiving the Ack of TCP. When network delay is long, reception of Ack will be delayed and sending rate will drop. This therefore leads to a drop in the frame rate.

- Countermeasure

This problem can be avoided by receiving via multicast. Multicast uses UDP and Ack does not exist. As such, the sender will be able to continue sending without being affected by network delays.

105

Page 105
Image 105
JVC VN-V686UAPI manual Faq