Example of response encode(1).quality&202 Accepted(encode(1).status=save)
Interpretation Change the file size setting of JPEG. The unit of set values is in KB.
When frame size is VGA, setting between the range of 10k to 100k is possible. When frame size is QVGA, setting between the range of 3k to 33k is possible.
When VFS (VariableFileSize) is specified for rate control at the WEB setting page, 7 levels will be available for selection. Each of these choices corresponds to the file sizes as follows.
Level | File Size Setting for VGA | File Size Setting for QVGA |
1 | 80k | 27k |
2 | 60k | 20k |
3 | 40k | 13k |
4 | 30k | 10k |
|
|
|
5 | 25k | 8k |
|
|
|
6 | 20k | 7k |
7 | 15k | 5k |
|
|
|
When rate control is set to vfs and a file size that is not stated above is specified, the closest choice will be displayed on the WEB setting page. The change is saved by the API, encode(1).status=save. If the change is not saved, the setting is restored by reboot.
Allowed users admin, operator
Getting MPEG-4 Frame Size from VN-V686
Format /api/param?encode(2).framesize
Example of response encode(2).framesize=vga&200 OK
Interpretation Acquire
Allowed users admin, operator, user
Setting MPEG-4 Frame Size for VN-V686
Format /api/param?encode(2).framesize=data
Example /api/param?encode(2).framesize=qvga
Example of response encode(2).framesize&202 Accepted(encode(1).status=save) Interpretation Change
When frame size of JPEG and
The change is saved by the API, encode(2).status=save. If the change is not saved, the setting is restored by reboot. Allowed users admin, operator
33
