
Basic operations
5 Press ENTER.
The third page is shown, in which the | Basic playback |
[DIGITAL AUDIO OUTPUT] is already open. |
|
DVD PLAYER SET UP |
|
DIGITAL AUDIO OUTPUT | DOLBY DIGITAL/PCM |
ANALOG DOWN MIX | PCM ONLY |
DOLBY PROLOGIC | |
| DOLBY DIGITAL/PCM |
D RANGE CONTROL | STREAM/PCM |
OUTPUT LEVEL |
|
SELECT | USE 5∞23 TO SELECT, USE ENTER TO CONFIRM |
ENTER |
|
|
|
DIGITAL AUDIO OUTPUT options
6 Press 5/∞ to select a desired digital output signal type.
Set this item correctly when you connect the unit to an external surround decoder or D/A converter. (If you do not connect the unit to such a device, you do not have to set this item.)
•When connecting to a Dolby Digital decoder, select [DOLBY DIGITAL/PCM].
•When connecting to a DTS decoder, select [STREAM/ PCM].
•When connecting to other digital device, select [PCM ONLY].
7 Press ENTER.
The TV screen returns to the opening display.
To bring up the DVD PLAYER SET UP display later
Press CHOICE for a few seconds until the DVD PLAYER SET UP display appears.
To change the brightness of the display window
Press DIMMER - EFFECT on the remote control unit.
You can select the display window brightness from three levels.
Inserting discs
1 Press 0 (open/close) on the right of the disc tray you want to open.
2 Place a disc in the disc tray.
With the label side up
• To insert an
3 Press 0 (open/close) located on the right of the disc tray.
Hint
You can insert or remove the disc by pressing 0 (open/close) for a disc tray which is not in use for playback while a disc in the other tray is being played, without interrupting playback.
Using the OPEN/CLOSE button on the remote control
You can open and close the disc trays by using the OPEN/ CLOSE button on the remote control unit in the following ways.
To open the current disc tray
In stop mode, press OPEN/CLOSE, and the current disc tray opens.
•To check the current disc number, press ON SCREEN to bring up the status bar (see page 11).
To remove the disc currently being played
During playback, press OPEN/CLOSE, and the disc tray containing the disc currently being played opens.
To open the desired tray that contains a disc
1Press DISC SELECT.
2Press the numeric buttons (1 to 5) to designate the disc tray you want to open.
3Press OPEN/CLOSE.
• If you proceed as above during playback, playback stops.
NOTES
Basic | operations |
|
|
•You cannot use DISC SELECT and the numeric buttons to open the disc tray whose disc indicator is not lit.
•If you use DISC SELECT and the numeric buttons to designate a disc tray, or press 0 (open/close) for a disc tray which is not in use for playback while another disc tray is open, the disc tray will be closed.
9