Additional information
AV COMPU LINK remote control system
The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest operation. If your video/audio unit (such as a DVD unit, CD unit and VCR) and TV or/and amplifier/ receiver support the JVC AV COMPU LINK system and are tied with the JVC AV COMPU LINK cable(s), simply starting the unit will automatically make all necessary settings on the TV and/or amplifier/receiver to allow you to enjoy the playback.
Connection and setup
Using an AV COMPU LINK cable, connect the AV COMPU LINK terminals of each component to one another.
•The unit’s AV COMPU LINK setting is controlled using the OTHERS menu in the preference display. See page 33.
•For information on the connection between a TV and a receiver, refer to the receiver’s instructions.
To AV COMPU LINK (ll, EX or lll)
TV
The unit
•If you connect the unit to a TV via AV COMPU LINK, set the unit’s AV COMPU LINK setting as follows.
-When connecting to the
-When connecting to the
To AV COMPU LINK (ll, EX or lll)
TV
The unit | To AV COMPU LINK |
|
VCR
•If you connect the unit to a TV and VCR via AV COMPU LINK, set the VCR’s Remote Control Code and the unit’s AV COMPU LINK setting as follows.
-When connecting to the
VCR’s Remote Control Code: B
-When connecting to the
VCR’s Remote Control Code: A
| To AV COMPU LINK |
|
| (ll, EX or lll) |
|
TV | Receiver | To AV COMPU |
| LINK | |
|
| |
|
| The unit |
•If you connect the unit to a TV and receiver via AV COMPU LINK, set the unit’s AV COMPU LINK setting to DVD1.
IMPORTANT!
When you make video connection between the unit and another device (such as a receiver and TV) via the composite,
Notes for connection
•If you connect the unit to a receiver via AV COMPU LINK in a system including a Dolby Digital decoder, some functions may not be performed automatically.
•Connect the AUDIO OUT jacks of the unit to the audio input jacks of a receiver indicating “DVD.” Otherwise, the system will not work correctly.
•There may be no description about connections to the unit in the instruction manual of a TV or VCR. However, a TV or VCR with AV COMPU LINK terminals indicating “II,” “EX” or “III” can be connected to the unit.
Operation
The JVC AV COMPU LINK system allows you to enjoy video and/ or audio by simply pressing Play on the source component (the component which plays back the video or audio, such as a DVD unit or VCR). You do not even have to switch on power on the TV or receiver.
1
2 Insert a disc (or tape) into the source component.
3 Press 3 of the source component.
The following actions are performed automatically:
•Turning on the TV power.
•Setting the source of the TV to the external input
•Turning on receiver power.
•Setting the source of the receiver to the component which has started playback.
Additional | information |
38
