JVC YU30052-625-1 manual Open Cover, Watch Recording, To Perform High-Speed Search, Lamp

46EN

PLAYBACK

Basic Playback

You can watch what you’ve recorded in the viewfinder.

PLAY	OFF	REC		POWER
				LAMP
			5S

POWER DIAL

OPERATION PANEL

COVER

REW

RE SHOOT

PLAY /PAUSE

1 SELECT MODE

Pull out the viewfinder and set the Power Dial to “PLAY”.

2 OPEN COVER

Slide the camcorder’s Operation Panel cover as shown in the illustration.

3 REWIND TAPE

Press REW. If you rewind all the way to the end of the tape, it stops automatically.

4 WATCH RECORDING

Press PLAY. You can watch the recording in the viewfinder.

5 END PLAYBACK

Press STOP and set the Power Dial to “OFF”.

NOTES:

●You can also perform a High-Speed Search by pressing and holding REW or FF during the PLAY mode. The search continues as long as you hold the button. Once you release it, normal playback resumes.

●A slight mosaic effect appears on screen during High-Speed Search. This is not a malfunction.

●The sound is not available during High-Speed Search.

Still Playback

To temporarily stop playback, press PAUSE. Press again to resume playback. If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged. After 5 minutes in the stop mode, the camcorder’s power is automatically turned off.

To Perform High-Speed Search . . .

..... press REW or FF after pressing PLAY. The tape

will move at approximately 9 times the normal playback speed. Watch in the viewfinder and, when you reach the spot you want to see, press PLAY and normal playback resumes.