10EN GETTINGSTARTED (Cont.)

Clock (Lithium) Battery CR2025 Insertion/Removal

This battery is necessary to operate the clock and to perform date/time settings.

BATTERY COVER

1 OPEN BATTERY COVER Slide off as shown in the illustration.

2 REMOVE OLD BATTERY

Pull the battery holder out as shown, and slide the battery down and out of the holder.

3 INSERT NEW BATTERY

Insert the battery, with the “+” side showing, in the holder. Then insert the battery holder in the battery cover.

4 CLOSE BATTERY COVER

NOTES:

When the battery is depleted, the “ ” indicator appears in the viewfinder after you turn the power on.

See “SAFETY PRECAUTIONS” on page 2 for information on safe handling of lithium batteries.

After changing the lithium battery, reset the date and time (pg. 11).

Page 10
Image 10
JVC YU30052-625-1 manual Clock Lithium Battery CR2025 Insertion/Removal, Remove OLD Battery, Insert NEW Battery