60 EN
Viewfinder Indications
No. NAME & FUNCTION$“No Tape Loaded” Indicator
Appears for 15 seconds after power is turned on
if there's no tape loaded.
%Clock Battery Warning
Appears when the clock (lithium) battery is not
in place or exhausted. For inserting or replacing
the clock battery, refer to page 10.
^Wind Cut Indicator (Z pg. 19)
&Date/Time Display (Z pg. 11)
*Recording Mode Indicator (Z pg. 24)
(Sound Mode Display (Z pg. 19)
)Time Code Display (Z pg. 26)
qSnapshot Indicator (Z pg. 22)
wSelf-Timer Indicator (Z pg. 25)
eFocus Indicators (Z pg. 40)
rWhite Balance Indicator (Z pg. 38)
tExposure Indicator (Z pg. 36)
yIris Lock Indicator (Z pg. 37)
uZoom Level Indicator (Z pg. 23)
iFADE/WIPE Indicator (Z pg. 28)
oP.AE/Effect Indicator (Z pg. 33)
pPlayback Sound Mode Display (Z pg. 45)
—“Tape End” Indicator (Z pg. 21)
—An error number (E01, etc.)
appears in the viewfinder (Z pg. 66)
Consult your nearest JVC dealer.
No. NAME & FUNCTION1Select Dial Position (Z pg. 15)
2GAIN UP Indicator (Z pg. 17)
3Wide Mode (Z pg. 17)
4“Battery Low” Indicator
Appears and blinks when battery charge is low.
5Digital Image Stabilizer Indicator
(Z pg. 17)
6Record-Standby Indicator (Z pg. 24)
7“Cassette Loaded” Indicator
Appears when no tape is loaded, or when you
try to record with the record safety tab set to
“SAVE”.
8Condensation Warning
When this indicator appears, all functions are
disabled. Turn the unit off for a few hours, and
when you turn it on again the indicator should
disappear.
9Tape Remaining Indicator (Z pg. 21)
0Recording Indicator (Z pg. 20)
!“Tape Running” Indicator (Z pg. 20)
@Audio Dubbing/Insert Editing Mode
Indicator (Z pgs. 56, 57)
#Head clog warning
At the start of recording, appears and
blinks if dirt is detected on heads. Stop
recording and clean the heads using the
Cleaning Cassette. (Z pg. 63)
Recording And Playback
DTW48kHz/FULL12345678
9
0
!
@
#
$
%
^
&
*()qw
e
r
u
t
y
o
p
PHOTORECTAPE!30min
25. 12. 96
10:35
F. AUTOPAUSEMODE5SD
SOUND 32kHz6we