EN 51
Random Assemble Editing
Using the
SOURCE TAPE (Camcorder)
NEW TAPE (VCR)
| TO REMOTE PAUSE |
TO EDITING JACK | JACK |
EDITING CABLE | |
TO | TO |
OUTPUT JACK | INPUT JACK |
| ||
|
| TO AUDIO |
TO AUDIO OUTPUT JACKS (L/R) | INPUT JACKS (L/R) | |
RED | AUDIO and VIDEO cable | RED |
WHITE |
| WHITE |
YELLOW |
| YELLOW |
TO VIDEO OUTPUT JACK | TO VIDEO INPUT JACK | |
T W
VIDEO OUT select switch (Y/C or CVBS)
Cable adapter (provided)
If your VCR has the
cable adapter.
1 MAKE CONNECTIONS
Connect the Docking Station to your VCR and make sure that the playback picture and sound are available on the connected TV (☞ pg. 42).
NOTES:
●When using a JVC VCR with a remote pause terminal, connect the editing jack on the Docking Station to the VCR’s remote pause terminal using an editing cable.
●If the VCR has an
●If the VCR has only one audio input terminal, connect it using a conversion plug.
●Set the VIDEO OUT select switch of connector as required: either to “CVBS” (with the direct VCR connection) or to “Y/C” (with the RGB converter connection).
To Operate The VCR With The Remote Control . . .
..... press and hold SHIFT, then press the
appropriate control button.
2 START SOURCE PLAYBACK
Press PLAY and then press R.A. EDIT ON/OFF on the remote control. Make sure to point the remote control at the Docking Station's sensor.
•The Random Assemble Editing Menu appears on the TV screen.
•If you're not using a Fade/Wipe at the PROGRAM 1
3 EXECUTE FADE/WIPE IN
Press FADE/WIPE.
•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.
•You can’t use a Picture Wipe/Dissolve at the beginning of Program 1, or at the end of the last scene.
CONTINUED ON NEXT PAGE
