Karcher VC 6200 manual Commissioning and operation, Description of the Appliance, Start up, Figure

„Do not use worn out appliance; first put it out of use; then arrange for its proper disposal as scrap.

Commissioning and operation

Please take notice! Should, while turning the appliance on, the mains furse tripper shut off, possibly, other electrical applianc- es are connected and are operating on the same electric circuit. Should this be the case, put the appliance in its lowest power stage, before turning the appliance on. After- wards you may select a higher power stage. Refer to chapter "Technical data" for power fuse protection.

Important notice! The appliance will shut- down automatically, if there is danger of overheating. Turn the appliance off and pull the power plug. Make sure, that the nozzle, the suction pipe or the tube is not clogged, failing all the above the filter must be changed. After the elimination of the interfer- ence let the appliance cool down for a mini- mum of 1 hour, before using it again.

Description of the Appliance

Please unfold the pages with the dia- grams!

1Power cord with plug

2Push button take-up cable

3On/Off button

4Suction control

5Suction hose

6Handle

(A) Manual vaccum slide

7Teleskopic suction pipe *

8Adjustable teleskopic suction pipe *

9Floor nozzle

10Cover attachment housing

11Attachment housing QuickClick:

includes upholstery nozzle, telescopic gap nozzle and a furniture brush

12Change filter indicator

13Shutter lever, lid filter bag/ motor protec- tion filter

14Motor protection filter

15Filter bag holder

16Cover HEPA filter

17HEPA-filter

18Carrying handle

*depending on model

Start up

Figure 1

ÎLock the suction hose neck in the suction opening.

ÎTo take off, push both lock devices to- gether and pull the tube.

Figure 2

ÎConnect handle and suction tube and in- sert.

ÎConnect the floor nozzle and telescopic suction pipe and insert.

Figure 3

ÎUse the ajustment in order to adjust the telescopic suction pipe to the lengh you wish.

Figure 4

ÎWhen you stop or you take a short break, hang the floor nozzle into the parking po- sition on the back of the appliance, and push it into the resting position.

Figure 5

ÎTo remove, press handle backwards in the direction of the appliance. The floor nozzle is thus unlocked from the parking holder and can be removed upwards.

Figure 6

ÎHold the power cord at the plug and pull it out. Insert the mains plug into a socket.

ÎTurn on/off the appliance.

English 7