Contents
Controls, displays and connections | 3 |
View of front panel, rear panel and remote control handset | 3 |
Description of controls, displays and connections | 4 |
Safety instructions | 5 |
Important notes regarding operation | 5 |
Important notes on siting and installation | 6 |
Connecting up and putting into operation | 7 |
Connecting up the unit | 7 |
Inserting batteries into the remote control handset | 8 |
Tuning UHF channel | 9 |
Receiver operation | 10 |
Switching the unit on | 10 |
Switchover between TV and radio mode | 10 |
Selecting a programme | 10 |
Adjusting volume, balance and tone | 11 |
Muting the sound | 11 |
12 | |
SAT/TV changeover | 12 |
Setting date and time | 12 |
Timer setting | 13 |
Daily and weekly repeated | 14 |
Video recorder playback (VCR) | 15 |
Switching back to last programme | 15 |
Programme sorting (insertion), swapping and copying | 15 |
Operation without remote control | 16 |
Displaying programme overview | 16 |
Programming TV programmes | 17 |
Tuning in TV programmes | 17 |
The “Video“ menu | 18 |
Programme name | 20 |
The “Audio“ menu | 20 |
Programming radio programmes | 22 |
Tuning in radio programmes | 22 |
The “Radio“ menu“ | 22 |
Initial settings | 23 |
Calling the initial setup menu | 23 |
Modulator output channel | 23 |
OSD language | 24 |
LNB supply voltage | 24 |
LNB supply voltage in standby | 24 |
Programme selection | 24 |
On Screen Displays (OSD) | 24 |
Remote control handset | 25 |
Oscillator frequency | 25 |
DiSEqC menu | 26 |
22 kHz signal | 26 |
Tone burst and DiSEqC signal | 27 |
Switching over remote control’s command set | 29 |
Features | 30 |
Specifications | 31 |
Scart socket assignments | 32 |
Connection example | 33 |
2
