Kathrein UFD 400 manual Programming radio programmes, Tuning in radio programmes, Radio menu

Programming radio programmes

Programme providers are continually bringing out new radio programmes for broadcast via the satellites. The “Radio“ menu allows you to store these pro- grammes.

The settings for radio programmes in “Radio“ mode are carried out in the same way as for the “TV“ mode.

Tuning in radio programmes

∙Switch from “TV mode“ into “Radio mode“ using the key.

∙First select the programme slot that is to be programmed afresh.

∙Call up the radio menu by pressing the + keys in succession.

∙Select the desired menu line using the . keys

∙For direct numeric input use the keys ....

	or
	∙	Alter the values step-by-step with the			keys.
	∙	Press the	key twice in order to save your settings.
	∙
Note		Exit from the menu with the		key.
	Take account of the note on memory organisation of TV and radio programmes on
	page 17.

The “Radio” menu

The following settings can be made in the radio menu:

Setting option:

Programme slot: from 1 to 250

Programme name: 5-character station identifier

Sat-transm. freq.:		from 10700 to 12747 MHz
Polarisation:	Hor Low / Vert Low /
	Hor High / Vert High
Orbit position:	1 to 4
Oscillator:	LO 1 to LO 4
Mode:	Mono wide, Mono narrow, Stereo
Sound carrier freq.:		from 5.00 to 8.98 MHz
Audio de-emphasis:		50 μs / J 17 / dnr,75 μs
Volume offset:		from 0 to –3

The bottom line shows the keys you can use to make the settings.

Radio programmes are transmitted on sound subcarriers only. The setting to be made is therefore either “Stereo“ or “Mono narrow“. Here the audio de-emphasis is selected automatically as “DNR“ and 75 μs.

Settings are carried out in the same way as for the TV programmes.

Note	You can terminate any setup procedure immediately (also without storing) by re-
	turning to normal operation via the	key.

22