Controls, displays and connections
Front panel controls and displays
1Mains switch (with mains isolation)
2Buttons for programme selection
Switchover from TV to radio mode by pressing both buttons simultaneously.
3LED display (four character
To display the selected programme slot and parameter set- tings.
Remote control handset keys
Function 1:
Command set changeover
Function 2:
To blank out the video signal (in setup mode) This function is to be used if the picture no longer synchro- nises on adjustment and the picture scrolls.
Function 1:
Last function. Allows you to switch back to the last programme that was selected
Function 2:
Displays the info menu
(active only if after pressing the key 
the programme list is displayed.)
Function 1:
Calls up the TV programme list (or radio programme list in radio mode).
Function 2:
Calls up menu for "Programme slot sorting (insertion), swapping and copying“
(with | press in succession) |
Function 1:
Volume control
Function 2:
To alter settings data in setup mode
Function 1:
Stores the chosen settings
Function 2:
Primary key for calling the separate setup menus (e.g. video settings)
Function 1:
Sound muting)
Function 2:
Calls up the menu for audio settings
(with | press in succession) |
Rear panel controls and connections
1Mains input socket for 230 V/50 Hz
2DATA socket
a)Connection facility for the URS 200 external infrared sensor.
b)Connection for the UFP 10
3VHF/UHF antenna input (signal is looped through).
4VHF/UHF antenna output
(TV signal
5Satellite IF signal input A and output of LNB supply voltage
6Audio output, left and right channel (Cinch sockets)
7Scart socket, TV connection
8Scart socket, VCR connection
9Scart socket, decoder connection
Starts a timer
Last function. Allows you to switch back to the last pro- gramme that was selected
Function 1:
On/Off (Standby),
Attention: No mains isolation results!
Function 2:
Return from setup mode into normal operation
Set timer, date and time
Function 1:
Selection of TV/SAT mode
Function 2:
Calls up the menu for video settings
(with | press in succession) |
Function 1:
Steps through the programmes either up or down
Function 2:
Selection of individual menu entries in setup mode
Function 1:
Switchover to radio mode
Function 2:
Calls up the menu for radio settings
(with
press in succession
Stereo/Mono- (2 channel) changeover
| Numeric keys 0 - 9 for programme selection and fre- |
to | quency entries |
|
4
