Programme selection
Reception status - radio
After the
Every time you press the button, an on- screen display shows you the selected programme together with the time, the programme start and end times as well as the programme title in the information box provided these data are transmitted together with the signal.
By pressing the button, you can exit this information box permanently displayed or switch it off by pressing the button once again.
A further option of selecting a different
programme is to press the button. The radio programme list is now displayed. In the left column, it will provide information relating to the received satellites, the transponder and its transmission frequency, the polarisation, the symbol rate and the scrambling. The programme number, the programme broadcaster and the type of reception signal (free
shown on the right.
By pressing the buttons you jump to the next programme and by press-
ing the buttons you jump to the neighbouring page or
Confirm your programme selection by pressing the button, or press the button to exit the programme list and remain in the programme already set.
Selecting a radio programme by number entry
| You can select a different radio programme during a current radio programme by |
| entering the programme location number. Use the number buttons to for |
| the purpose of entering the programme location number. |
Example | You wish to select the radio programme |
| under the programme location number 015. (The order of radio programmes is de- |
| fined in the programme memory and therefore only serves as an example here.) |
| To select this programme, press the numbers and one after the other. The |
| receiver waits for about 3 seconds for entry of the next number. |
| Follow the same procedure for all other programmes – i.e. also programmes with |
|
21
