Programme selection
This section describes how you select analogue and digital TV programme with your receiver and how you can set the required volume.
This description of the functions assumes that the receiver has been connected correctly.
If you wish to connect the receiver yourself, please read the section "Connection and
Selecting a TV programme
Reception status digital
The following information describes how to select other channels and shows what the
After switching on the receiver, simply press the buttons, in order to se- lect other TV programmes in their ascending or descending order in the channel memory.
Every time you press the button, an on- screen display shows you the selected programme together with the time, the programme start and end times as well as the programme title in the information box provided these data are transmitted together with the signal.
By pressing the button, you can leave this information box permanently dis- played or switch it off by pressing the button once again.
You will receive the "channel scrambled" message for scrambled channels.
A further option for selecting a different programme is to press the button. The TV programme list is now displayed. In the left column, it will provide for digital programmes information relating to the received satellites, transponder and its
transmission frequency, polarisation, symbol rate and scrambling. The pro- gramme number, the programme broadcaster and the type of reception signal (analogue/digital) is shown on the right.
With the
uttons you jump to the next programme,
with the buttons you jump to the
neighbouring page or with the buttons on the remote control enter the programme number (Ch). Confirm your selection by pressing the button. Press the button to exit the programme list and remain in the already set programme.
19
