Setting system parameters
The following settings should not be altered without good reason, since they are factory presets or operational settings, matched specifically to your receiving sys- tem.
Only extensions to the receiving systems or modifications call for new settings.
The selected menus, submenus, entries, and parameters are highlighted. The menus are mainly
The main menu comprises of the following submenus:
Programme lists,
System parameters,
Installation and
Menu language
System parameters
Select the menu „System parameters“ with the menu button, the
buttons in the main menu and . The buttons are used to select fur- ther positions.
Parental lock
The basic settings that can be implemented here are described under the setting up of parental lock in chapter "Password."
System information
Under the „System information“ entry, you will find the factory presets, which can- not be altered, and are intended solely for service personnel.
Press the or button to return to the submenu system parameters.
Local time / timer
The receiver displays the UTC time transmitted with the data stream (United Time Coordinate, former Greenwich Mean Time). Therefore in Germany, the time must be corrected by +1 hour.
A correction for summer time may possibly be required so that the timers turn on and off at correct times.
You can make this correction yourself using the numerical buttons. Move the cur-
sor bar with the button to the entry Local time/Timer. The first digit in the time entry is shadowed. You can now correct date and time with the numerical buttons.
After each entry, the cursor jumps to the next position. Press the two times to end the entry. The receiver saves the new setting.
Afterwards, do not switch off the receiver with the mains switch but rather with the remote control, otherwise the settings will be lost.
Timer menu
See section "Timer settings."
34
