Kathrein UFD 520 manual Analogue setting, Video menu

Analogue setting

In general, you do not need to alter the analogue programmes. New analogue pro- grammes are unlikely to appear due to digital television's advancement. The pro- gramme data is already factory preset or will be stored during the search.

For matching purposes, there are two menus available which are displayed in white.

Video menu

You reach the video menu via the ￿button. You select the subentry using the

￿￿buttons. Your settings are saved with the ￿button.

Name

The name of the saved programme is specified here. You can change it yourself. Refer to the section "operating manual /alphanumerical entry" to find out how to proceed.

Frequency

Enter the 5-digit frequency within the range of 10700 to 12747 MHz with the numerical buttons ￿…￿. Using the

￿￿buttons you can optimise the receiving frequency with 1 MHz increments (rec- ommended if picture is noisy due to a weak signal).

Polarity

In this menu entry, the vertical and horizontal polarisation is selected by means of a switching voltage (14 or 18 V) with the￿or ￿.

Band

You select the transmission band here. The C-band 3.6 to 4.2 GHz or the KU- band 10.7 to 12.75 GHz. Your receiving system must of course be set up to receive these bands.

Low threshold

The low threshold setting needs to be altered only if reception conditions are poor. Normally, the setting is set to '1.'

Observe the picture while making the setting ￿or ￿buttons and adjust for mini- mum interference.

Contrast

Using the ￿or ￿button you can adjust for maximum picture brightness.

44