Kathrein UFD 520 manual TP set-up/search, Transponder selection

Installation menu

The message appears at the end of the search.

The search is complete

Press (OK) button

All new programmes are added to the existing programme list.

You can interrupt the search by pressing

the ￿button.

TP set-up/search

In this menu you can scan through the transponders for specific programmes, e.g. when new programmes are offered in the package of a specific broadcaster. You can obtain this information from the respective teletext from SAT 1 or corresponding TV and satellite magazines

as well as from the Internet. Press ￿to open the menu.

Transponder selection

The following settings are now possible (select positions with ￿￿):

- Desired satellite with ￿or ￿, the trans- ponder frequency with numerical buttons,

- the polarisation with ￿or ￿button,

the symbol rate with the numerical buttons and

- search mode for free-to-air or free and

- encrypted programmes with the ￿or ￿ button.

The bar diagram indicates the relative signal strength and is not an indication for the quality of the receiving system.

Start the search by pressing ￿in the "search" position.

The shown on-screen display appears as the result of the search.

Exit this menu by pressing ￿and go to the previously highlighted programme (here ZDF).

Press the ￿to return again to this menu to continue searching for further trans- ponders.

40