Adding/removing satellites
Setting up a satellite
The LNB can naturally also accommodate new satellites.
All new settings must be carried out from one digital programme position because of the connected on screen displays.
For this, the orbit position that you need to take a bearing on must be known. The “Antenna settings“ menu entry in the installation menu can be used as an aid for alignment of the antenna.
The following message appears
Changes are being saved
One moment please
Arrive to the menu item "LNB
configuration" via the main menu and the „Installation“ - submenu with the
and buttons (plus
password). Select this menu item with and can then enter or select a new satellite.
Remember that your system must be set- up accordingly!
In the next step, move with to e.g. the entry „User1“.
After pressing the or button, the on- screen display appears shown opposite.
Confirm it with .
You can now make the entries appropriate to your receiving system in the corre- sponding positions using the ,and or buttons and exit the menu by
pressing the button three times. At the same time, the new station data is stored.
Make the alphanumerical entries using the numerical buttons on the remote con- trol. For more information see section "operating instructions.
28
